Canon MF515 Series User Manual page 666

<Menu>
Setting>
select <Prefix>
<PBX>
Select the type of PBX you are using. If you select <Prefix>, register the prefix code on the next screen.
<Code>
Enter the prefix code using the numeric keys, tap <Pause>, and then tap <Apply>. If you do not insert a
pause, the prefix code is not registered.
Archive TX Document
In addition to the destination specified when the fax is sent, you can specify whether faxed documents are
also sent to a preset storage address for archiving.
Off
On
TX Function Settings
Specify settings for sending faxes.
Change Default Settings
Specify settings used for sending faxes. The selected settings are used as the default settings when scanning
documents. Changing Default Settings(P. 172)
Resolution
200 x 100 dpi (Normal)
200 x 200 dpi (Fine)
200 x 200 dpi (Photo)
200 x 400 dpi (Superfine)
400 x 400 dpi (Ultrafine)
Density
Nine Levels
2-Sided Original
Off
Book Type
Setting Menu List
<Fax Settings> <Basic Settings>
<PBX> Select <Prefix> or <Hooking>
<Apply>
*2
<Communication Management Settings>
Enter the outside line access number if you
Archiving Sent Faxes(P. 197)
657
<R-Key