Bryant Evolution Connex Control Installation Instructions Manual page 54

– If the connection is unsuccessful, verify that the proper information has been entered
before you touch RETRY. The control will go through the process again.
• After the control has connected to the network, go to www.MyEvolutionConnex.Bryant.com
to register the unit and begin remote access. This requires the MAC address and serial
number of the Evolution Connex Control. To find the serial number and MAC address of the
Evolution Connex Control, click on Menu, Down Arrow, Wireless and View MyEvolution
Registration Info. This screen will provide the information needed on the MyEvolution
website during registration.
• If you have any issues, please contact your servicing dealer or contact the support desk at
1-800-428-4326.
• When the connection to the MyEvolution web server has been established, the status screen
will show Connected for both Wi-Fi and the server.
54
A13238
A170285B