Utility Event Setup; Wireless Set-Up - Bryant Evolution Connex Control Installation Instructions Manual

Dealer phone number (20 characters, max)
Dealer URL (50 characters, max)
The wall control dealer information display is 30 characters wide. Dealer names and URLs over
30 characters will be split into two lines on the display.
The PC/MAC Desktop application to format the dealer logo and contact information can be
found at:
www.MyEvolutionConnex.Bryant.com/Evolution/downloads
Download the program and follow the program instructions.
Once the dealer logo and contact information have been properly loaded onto the micro SD
card, insert the micro SD card into the bottom edge of the Evolution Connex Control. The
control will prompt you whether or not to upload the dealer logo. Once complete, you will
receive a confirmation that your upload was successful. If the information was not stored
properly on the micro SD card, you will receive an error message that the dealer logo was not
found. Refer back to the PC/MAC Desktop application instructions and try again. Once the
upload is complete, touch NEXT.
If you have problems, contact your distributor service manager for support.
A170253

6.8. Utility Event Setup

The utility event setup is used to enable utility events if the home owner is participating in a
utility event program. Selecting ON will enable the utility event icon on the main menu.
NOTE: See the Owner's Manual for additional details regarding the setup and configuration of
the Utility Event feature.

7. Wireless Set-up

The Evolution Connex Control supports simultaneous connections to home Wi-Fi® networks.
If the in-home Wi-Fi network is found to be incompatible with SYSTXBBITC01-A, another 2.4
GHz band wireless router can be installed to establish Wi-Fi network connectivity.
Please call 1-800-428-4326 for support network with Wi-Fi network set-up and connection to
the MyEvolution Server.
51