Quantum LTO-3 Model B Installation Manual page 9

LTO-3 (Model B), LTO-4 (Model B), LTO-5, LTO-6, and LTO-7
Figure 12 Installing the
Mounting Brackets
Mounting bracket s
4 Install the new tape drive (see Figure 9):
a Position the mounting bracket keyhold slots over the mounting posts.
b Slide the drive toward the back of the enclosure.
c The spring-loaded button will automatically snap into place.
Figure 13 Installing the Tape
Drive
Tape drive
Spring-loaded button
Installing a Second Tape Drive or Replacing a Tape Drive 9