Quantum LTO-3 Model B Installation Manual page 20

LTO-3 (Model B), LTO-4 (Model B), LTO-5, LTO-6 and LTO-7
Figure 24 Removing the Pins
from the Rack Rails
20
Note: The ends of the rack rails are marked FRONT and REAR for proper orientation.
2 Attach the front mounting plate of each outer rail to the rack using four 10-32
screws in the previously marked holes in the front vertical mounting bars of the rack
(see Figure 25).
Installing the 1U Rackmount Enclosure in a Rack