Quantum LTO-3 Model B Installation Manual page 14

LTO-3 (Model B), LTO-4 (Model B), LTO-5, LTO-6 and LTO-7
Figure 19 Connecting One
Drive on One SCSI Bus
14
SCSI bus 1
cable
SCSI terminator
Tape drive 1
Note: To prevent possible data errors, when there is only one drive on a SCSI bus, the
tape drive should be connected to the SCSI connector closest to the terminator.
Caution: To avoid damaging the equipment due to electrostatic discharge, be sure to
practice ESD procedures when handling the tape drive.
3
Tape drive 2
Installing a Second Tape Drive or Replacing a Tape Drive
SCSI ID cables,
one for each
tape drive
SCSI bus 1
cable
SCSI terminator