Quantum LTO-3 Model B Installation Manual page 6

LTO-3 (Model B), LTO-4 (Model B), LTO-5, LTO-6 and LTO-7
Figure 7 Removing the
Mounting Brackets
Figure 8 Installing the
Mounting Brackets
6
2 Remove the screws securing the mounting brackets to the tape drive blank (see
Figure 7).
3 Secure the mounting brackets with two screws on each side of the tape drive (see
Figure 8).
4 Install the drive (see Figure
a Position the mounting bracket keyhold slots over the mounting posts.
b Slide the drive toward the back of the enclosure.
c The spring-loaded button will automatically snap into place.
9):
Installing a Second Tape Drive or Replacing a Tape Drive
Mounting bracket s
Mounting bracket s