Quantum LTO-3 Model B Installation Manual page 7

Figure 9 Installing the Tape
Drive
Installing a Second Tape Drive or Replacing a Tape Drive
LTO-3 (Model B), LTO-4 (Model B), LTO-5, LTO-6, and LTO-7
Continue with Connecting the Tape Drive Cables
Replacing a Tape Drive:
To replace a tape drive:
1 Remove the tape drive (see
a Disconnect all cables from the tape drive.
b Pull the spring-loaded button on the right mounting rail up.
c Slide tape drive forward and lift up out of the 1U rackmount enclosure.
Spring-loaded button
on page 10.
Figure 10):
Tape drive
7