Chapter3 Basic Operations; Input On/Off Control; Key Lock Function; Menu Configuration Function - ITech IT8600 Series User Manual

ООО "Техэнком" Контрольно-измерительные приборы и оборудование

3.1 Input On/Off Control

3.2 Key Lock Function

3.3 Menu Configuration Function

Menu Menu Setting
SYSTEM INFO
Model
Serial
Cpu Version
Dsp Version
Fpga Version
MAC address
Socket Port
SYSTEM SETUP
SYSTEM
Mode select
CF/PF setting
CF/PF Priority
Timing Mode
Short Function
Harmonic Formula
Peak Hold Mode
Power On Setting

Chapter3 Basic Operations

This chapter describes operations of the keys on the front panel of the
electronic load. The electronic load must be in the local mode when controlled
by the front panel. The default mode is the local mode after the electronic load
is turned on. In the local mode, the user can enable all functions of the load
through the front panel.
[On]/[Off] button on the front panel are used to control input switch. [On] button
lighted indicates the load input is on and the [Off] button lighted indicates the
load input is off. The initial state of electronic load is OFF.
Press [Lock] key to lock the front panel keys, LOCK label will display in LCD
screen. In this condition, the other keys are invalid except Lock key. Press
[Lock] key again to unlock.
System configuration such as the load mode and general settings are set in the
load menu. Press "MENU" on the front panel to set the system menu. You can
set the following menu items.
Copyright © ITECH Electronic Co., Ltd.
Instrument
information
Instrument model
Instrument SN
The version of Cpu
The version of Dsp
The version of Fpga
Network hardware address
Port number
System setup
AC/DC mode selection
CF/PF setting: CF/PF/BOTH
CF/PF setting priority: CF/PF
Timing mode enabling/disabling: Off/ On
Short-circuit function enabling/disabling
(Disable/ Enable), only for the load with DC
mode
Harmonic formula: THDF/ THDR
Peak holding mode: Off/ On
Power-on status: SAV0/RST
⚫
If Rst is selected, factory settings are
recovered after each start-up
www.tehencom.com
Basic Operations
system
24