Installation - Windster RA-35U30SS User Manual

Under cabinet wall mount
Hide thumbs Also See for RA-35U30SS:
Table of Contents

Advertisement

e.
For cabinet with recessed-bottom, use (2) 3" x 12" or 15" wood strips on
both sides to balance the recession. Use (4) 1-1/4" long flat head screws
to secure the wood strips to cabinet. (Fig. 1d)
3.
HOOD
a.
Inspect for any sign of defect or damage. (ie. scratches, dents, loose
seams, etc.)
b.
Power up the unit to make sure it is working properly.
c.
Remove the protective file on the baffle filters and fillers.
d.
Install baffle handles to filters using a Philips screwdriver.
PREPARATION
8
9

INSTALLATION

 
1. UNDER CABINET INSTALLATION
a.
Make sure all preparation steps are completed.
b.
Feed the wires coming out of the hood through the bottom of the cabinet.
c.
Lift the unit up flush against the wall and the bottom of the cabinet.
d.
Using the screws and washers provided, insert into each of the keyhole
openings and tightly secure the unit against the bottom of the cabinet.
NOTE: Install more screws through the back of the unit if necessary.
e.
Use the conversion collar for 8" ducting.
f.
Connect an 8" ducting to the collar of the hood.
g.
Finish off by sealing the connection point with aluminum tape.
2. WALL MOUNT INSTALLATION (OPTIONAL)
a.
Optional RA35DC duct cover is required for wall mount installation.
b.
Inspect the RA35DC for any sign of defect or damage. (ie. scratches,
dents, loose seams, etc.)
c.
Be sure you have the following content.
i. One piece stainless steel duct cover
ii. Screw packet
d.
Determine the exact location you want to install the range hood.
e.
Prepare back wall frame with cross wood support.
f.
Install the hood mounting bracket to the back of the unit and secure it with
the (12) screws provided. (6 screws for each bracket) (Fig. 2a)
g.
Mount the unit onto wall with mounting screws (not included) (Fig. 2b)
h.
Use a spirit level to ensure the balance of the hood is true.
i.
Install the exhaust piping and connect it to the outlet of the unit. (Fig. 2c)
j.
Place the duct cover on top of the unit and secure it with the (7) duct
cover screws provided. (Fig. 2d)
INSTALLATION
 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ra-35u36ssRa-35u42ssRa-35u48ss

Table of Contents