Pre-Installation Instructions
8014 Trotec Speedy 500
Laser Machine Requirements
1.4 Floor plan for the Speedy 500
It is necessary to have sufficient clear space to the sides, front and rear of the machine for
installation, operation and maintenance.
Top View
1000mm
39.37"
1000mm
39.37"
1000mm
39.37"
Rear View
Mains power inlet, PC connection and exhaust port locations.
Power
Connection
PC-
Connection
Head Exhaust-
Connection
440mm
17.32"
Chiller, Gas,
Compressed Air inlet
13/12/2011
Trotec Produktions- und Vertriebs GmbH_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
190mm
7.48"
1000mm
39.37"
Table Exhaust-
Connection
440mm
17.32"
115mm
4.53"
techsupport@troteclaser.com
5 / 15