To Set The Time And Date; To Change The Time Or Date Format; To Set Up Schedules - Automated Logic RC642 Technical Instructions

To set the time
You may need to adjust the time, date, or year in the Room Controller.
and date
1
2
To change the
The Room Controller can display...
time or date
Time
format
Date
To change the format:
1
2
To set up
An occupied schedule defines when the HVAC equipment is to use the occupied setpoint,
and an unoccupied schedule defines when it is to use the unoccupied setpoint. You can
schedules
set up occupied and unoccupied schedules for the following:
Schedule No. ...
1
2
3
4
1
Tap the TIME button until the display shows the setting you want to change.
NOTE If the default screen shows the time, push TIME once to make the time
editable.
To change:
Minutes
Day
Year
Hours
Month
Year (by tens)
Tap the TIME button until the display shows the item whose format you want to
change, then hold down the TIME button.
While holding down the button, tap
For...
Monday–Friday
Monday–Friday
Saturday
Sunday
Tap SCHEDULE until you see the Occupied schedule you want to set up.
9:00
1
Occupied Schedule M T W T F
Tap or .
Hold down or
as...
12 hour
24 hour
MM-DD
DD MM
or
a.m.
37
.
to select a different format.