Söllnerstr. 9
The communication between the software and your PLC is established.
6.4 Configure operating terminal via MPI-II /
MPI-USB
Note: The TP070 and OP73 can be configured via the RS485 with the MPI-II / MPI-USB.
Key
MPI-USB user manual
92637 Weiden
info@traeger.de
Display
Name
#01P?
Take the cable and press the Enter – Key . (Control elements
!02AG
see chapter).
MENU
Navigate with the Up/Down - Keys until you reach the Menu
Config
"Config". Press Enter.
Config
Search for the submenu „Mode". Press Enter
Mode
Mode
Press the Enter key to configure the new mode.
SOND USB
+49 (0)961 48 23 0 0
44 / 93
2022/01/21 01:28