Uninstallation Of The Usb Driver And Installation Of A New Version; Installation Of The Step5 © Addition Driver For Pg-Usb/S5-Lan + + / Usb-Rs232-Converter - Traeger PG-USB User Manual

Söllnerstr. 9 92637 Weiden info@traeger.de +49 (0)961 48 23 0 0
be closed, the language of the program can be changed or the program can be minimized as tray icon.
3.2.3 Uninstallation of the USB driver and installation of a
new version
Download the uninstallation tool from the homepage. You can find it on our homepage.
Disconnect the cable from the PC and follow the software and the USB driver and the required entries will
be deleted. Then you can download the relevant USB drivers from the download menu at the "Necessary
Downloads" and extract this file to your hard disk. Now plug in the cable and follow the hardware
installation wizard where you point into the folder where you unzipped the "new" USB driver. Now you can
continue to work with the PG-USB or USB-RS232-converter. The possible patch of Step5 software must not
be executed!
3.2.4 Installation of the Step5 © addition driver for PG-
USB/S5-LAN + + / USB-RS232-converter
In order to make the the PLC-VCOM furnished virtual COM interface available for Siemens Step © 5 in the
DOS box, must be installed this addition driver.
! Important ! PLC-VCOM must be installed before this Step © 5 addition driver. The installation of the
PLC-VCOM software is explained in the chapter „PLC-VCOM installation" .
Before you start the installation, make sure to stop any possible still running S5 original software,
otherwise the driver can not be installed.
1. Please download from the you known web-site the "S5-patch" and extract the file on your PC.
2. Now start the application "S5USB.exe" from the previously extracted folder
3. Device selection Now select the type of device. Select "S5-LAN + + / PG-USB-cable / USB-RS232-
converter" and confirm with "OK".
4.In the next dialog, start the installation by clicking on the "Install" button. The installation wizard will now
copy the required data. Please wait a moment.
5. Specify the folder where the software S5 is installed. Please wait while the installation routine searches
PG-USB user manual 5 / 23 2021/02/28 16:13