Tcp/Ip Rfc1006 Communication; Mpi Setting - Traeger 9352-USB User Manual

Söllnerstr. 9 92637 Weiden info@traeger.de +49 (0)961 48 23 0 0
access for the PLC used. Click "Yes" if you want to use the „MPI"communication type. Otherwise click
"No"(e.g. if you want to use the "PROFIBUS" communication type).

6.3.2.2 TCP/IP RFC1006 Communication

7. Press "Select" to add the RFC1006 required elements to the PG / PC - interface configuration.
8. In the dialog "Select", choose" TCP / IP" and click on "Install".
9. After successful installation, click "Close".
10. Back to the "Set PG/PC interface" dialog you will now find the desired entries called "PC -
Adapter(Auto)" (not supported), "PC - Adapter(MPI)" and "PC - Adapter(PROFIBUS)". Now you are able to
configure the bus. If you want to use the "MPI"communication type go ahead with step

MPI setting

. The
settings for "PROFIBUS" is explained in Profibus setting.
6.3.2.3 MPI setting
MPI-USB user manual 23 / 93 2022/01/21 01:28