Traeger 9352-USB User Manual page 68

Söllnerstr. 9 92637 Weiden info@traeger.de +49 (0)961 48 23 0 0
In this Dialog you could choose the used language in the application.
You could choose between German and English and confirm by clicking on the desired language.
9.3.2 Interface
In „set interface" you can choose the COM-port you device is connected at. Only the COM-port which was
aktive at starting the MPI-Kabel-Manager are shown.
„Search" update the COM-port listed in „set interface" and put the Kabelmanager to the respective COM-
port.
For access query choose „Direct" if your product connects via USB-cable or Nullmodem-cable. „Modem" if
your product connects via telephone line or „TELE-Network" if your product connects with a TELE-Network
device via telephone line. The bars below shows at which COM-port something was found or not.
9.3.3 Update
MPI-USB user manual 68 / 93 2022/01/21 01:28