nifty TM Series Operating And Safety Instructions Manual page 36

TM Series
Operating & Safety Instructions
4.7.2 TOWING
It is recommended that the maximum towing speed of 45mph (72kmph) be adhered to for the greatest
safety. In other than perfect conditions it is sensible to further reduce your speed in order to ensure full
control over your vehicle and trailer. The importance of the suitability of your towing vehicle must be
stressed. The manufacturers' details concerning each model will give you recommended Gross
Vehicle Weights (GVW) or Gross Train Weights (GTW) neither of which should be exceeded.
Wheel Nut Check
If being towed for the first time after initial build, please ensure the wheel nuts are secured to the
correct torque (Refer to Section 3.5) after two days or 100 miles. Also, if wheels have been
removed, recheck torque after travelling a maximum distance of 100 miles.
Brake Adjustment
Trailer brakes are adjusted for gradual over-run braking on initial build. After being towed for the first
week or 150 miles, the brake shoes will 'bed-in' and require adjustment for this wear. Adjust the
brake shoe clearance and check the hand brake lever travel in accordance with the manufacturer's
instructions. Please contact Niftylift Service Department for the correct adjustment procedure for your
specific brake/tow hitch combination.
POSITION THE TOWING VEHICLE AND TRAILER ON LEVEL GROUND BEFORE ATTEMPTING TO
COUPLE/DE-COUPLE.
Coupling Instructions
1) Depress the trigger on the lever mechanism and lift the handle upwards and forward.
2) Place the unlocked coupling head onto the towing ball and apply slight downward pressure. The
head will automatically lock onto the ball.
3) Ensure that the trigger has returned to its free position before attempting to tow, and that the
coupling head is securely on the towing ball.
4) Connect the breakaway cable/chain to the towing vehicle hitch - not to the tow ball itself.
5) Connect the lighting plug to the vehicle and check the light functions.
6) Raise the jockey wheel to its stowed position and secure for transit.
De-coupling Instructions
1) Apply trailer handbrake and chock wheels.
2) Lower the jockey wheel to the ground. Disconnect the breakaway cable/chain and lighting plug.
3) Operate the handle by depressing the trigger and manually lift the coupling head clear of the
towing ball or screw down the telescopic jockey wheel to achieve the same effect.
34
THE MAXIMUM RECOMMENDED TOWING SPEED OF A NIFTYLIFT IS 45 MPH
(72 KMPH) WITH A VEHICLE THAT COMPLIES WITH ALL ROAD TRAFFIC
REGULATIONS. SPEEDING MAY RESULT IN DEATH OR SERIOUS INJURY.
DO NOT TOW THE MACHINE ON THE ROAD AT SPEED WITHOUT EXTENDING
THE AXLES. (IF FITTED). PLEASE REFER TO DECALS ON MACHINE FOR
INSTRUCTIONS.
English/USA – 01/10
Issue 06