Advertisement
Quick Links
1
2
Ground Controls
Emergency Stop
Cage Overload
Green (Power)
Keyswitch
Ground Control Levers
P14926/001
Lower
Upper
Slew
Boom
Boom
3
4
5
12
Push and hold green power button
Select lever for desired boom function
6
7
8
11
Cage Controls
Emergency
Stop
Cage Control Levers
Cage
Levelling
Nifty 120T (12043)
9
1)
Cage/Platform
2)
Cage Controls
3)
Ground Controls – Buttons
4)
Ground Controls - Levers
5)
Manual Hand Pump
6)
Lower Boom
7)
Upper Boom
8)
Stabiliser Controls
9)
Handbrake
10) Tow Coupling
11) Jockey Wheel
12) Mains Power Input
10
Tilt
Green
Warning
(Power)
Cage
Keyswitch
Overload
Tele
Lower
Upper
Boom
Boom
Boom
P14927/001
Slew
Advertisement
Related Manuals for nifty 120T
Summary of Contents for nifty 120T
- Page 1 Nifty 120T (12043) Cage/Platform Cage Controls Ground Controls – Buttons Ground Controls - Levers Manual Hand Pump Lower Boom Upper Boom Stabiliser Controls Handbrake 10) Tow Coupling 11) Jockey Wheel 12) Mains Power Input Ground Controls Cage Controls Emergency Tilt...
-
Page 2: Daily Safety Checks
Always operate the Niftylift in accordance with the manufacturers full Operating & Safety Instructions supplied with each model. DAILY SAFETY CHECKS Labels & Manuals: Check all labels, placards and Operating & Safety manual (located in the box within the platform) are in place and legible. Structure: Check there are no loose, missing, damaged or malfunctioning components including but not limited to: chassis, booms, platform, platform gate (free to close under gravity), all welds, guards, covers, boom clamps, brakes, wheels, tyres and outriggers / stabilisers (if applicable). -
Page 3: Emergency Controls
GROUND/PLATFORM CONTROLS Check below, above and around the platform for any obstruction or hazards before operating any function. Ensure all red emergency stops are out. Ground: Turn the key switch at the ground control station to the “ON” position Platform: Remove the key from the ground control station (turn key anti-clockwise) and put the key in the platform control station and switch to “ON”... -
Page 4: Operational Safety
Handbrake Operation To operate the trailer parking brakes pull the handbrake lever upwards and backwards. The spring loaded mechanism will engage and stay in the operated position until re-set. To disengage the parking brakes, firmly grasp the handbrake lever and pull upwards. Depress the ratchet release button in the end of the handbrake lever and return the lever to the horizontal position. - Page 5 • Do not use the platform levelling system to artificially increase the outreach of the platform. Never use boards or ladders in the platform to achieve the same result. • Do not use the platform to lift overhanging or bulky items that may exceed the maximum capacity or carry objects that may increase the wind loading on the platform.