Lexmark MX517 User Manual page 239

Troubleshooting
Maintenance kit nearly low [80.xy]
For more information, visit the Lexmark support Web site at
support, and then report the message.
If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer
models, press
Maintenance kit very low [80.xy]
You may need to replace the maintenance kit very soon. For more information, contact customer support
at http://support.lexmark.com
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press
Memory full [38]
Try one or more of the following:
•
From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer
models, press
•
Install additional printer memory.
Memory full, cannot print faxes
From the control panel, do either of the following:
•
Touch Continue holding faxes without printing to clear the message.
•
Touch Attempt to print to restart the printer and continue printing.
Network [x] software error [54]
Try one or more of the following:
•
From the printer control panel, select Continue to continue printing. For non‑touch‑screen printer
models, press
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server. For more information, visit the Lexmark
support Web site at http://support.lexmark.com.
No analog phone line connected to modem, fax is disabled.
Connect the printer to an analog phone line.
Non‑Lexmark [supply type], see User's Guide [33.xy]
Note: The supply type can be toner cartridge or imaging unit.
to confirm.
or your service representative.
to confirm.
to confirm.
http://support.lexmark.com
to confirm.
239
or contact customer