Placing Information On Copies; Canceling A Copy Job - Lexmark MX517 User Manual

Copying

Placing information on copies

Placing a header or footer on pages
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Header/Footer
4
Select Header or Footer, and then touch
5
Select where you want to insert the header or footer, then select a text option, and then touch
6
Select where you want to print the header or footer, and then touch
7
From the Header/Footer menu, touch
Placing an overlay message on each page
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Overlay > select an overlay message >
Note: The message choices are Urgent, Confidential, Copy, Custom, and Draft.
4
Touch Copy It.

Canceling a copy job

Canceling a copy job while the original document is in the ADF
When the ADF begins processing a document, touch Cancel Job on the printer control panel.
.
> Copy It.
.
.
88
.