Headlamp High/Low-Beam Changer - Pontiac 2002 Aztek Owner's Manual

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check for burned
fuse. See "Fuses and Circuit Breakers" in the Index.
If you have a trailer towing option with added wiring for
the trailer lamps, the signal indicator will flash at a
normal rate even if a turn signal bulb is burned out.
Check the front and rear turn signal lamps regularly to
make sure they are working.
Turn Signal On Chime
If either turn signal is left on for more than 3/4 mile
(1.2 km), a chime will sound to let the driver know to
turn it off.
If you need to leave the signal on for more than 3/4 mile
(1.2 km), turn off the signal and then turn it back on.
-
out bulbs and check the

Headlamp High/Low-Beam Changer

To change the headlamps from low to high, simply press
the turn signal lever away from you. Then release it. To
change the headlamps from high to low, pull the lever
toward you.
Flash-to-Pass Feature
When the headlamps are off, pull the lever toward you
to momentarily switch on the high beams (to signal that
you are going to pass). When you release the lever, they
will turn off.
When the high beams
are on, this light, on the
instrument panel cluster
and the optional HUD
display, will also be on.
2-45