Remote Lock And Unlock Confirmation - Pontiac 2002 Aztek Owner's Manual

Before your vehicle was shipped from the factory, it was
programmed in Mode 2. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:
1. Follow the instructions for "Entering Programming
Mode" listed previously.
2. Press UNLOCK on the remote keyless entry
transmitter.
3. Count the number of chimes you hear. The number of
chimes indicates the vehicle's current programmed
mode. If you do not wish to change the current mode,
you can either exit the programming mode by
following the instructions later in this section or
program the next feature available on your vehicle.
4. Press UNLOCK on the remote keyless entry
transmitter to change the current mode.
5. Press UNLOCK on the remote keyless entry
transmitter until you hear the number of chimes
corresponding to the mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Remote Lock and Unlock Confirmation

This feature allows you to customize the feedback
received when locking or unlocking your vehicle with
the remote keyless entry transmitter.
Programmable Modes
Mode 1: Both Features Off (Remote lock and unlock
confirmation are disabled.)
Mode 2: Exterior Lamps Flash Only
D
When you use the remote keyless entry transmitter
to lock your vehicle, your headlamps and parking
lamps will flash briefly to let you know the
command has been received.
D
When you use the remote keyless entry transmitter to
unlock your vehicle, your headlamps and parking
lamps will flash briefly during the day or the
perimeter lighting will flash briefly at night to let
you know the command has been received.
2-19