RGBlink RGB-RD-UM-M2 E003 User Manual page 55

(5) Click OK, a dialog reading "The new canvas size is smaller than the current canvas; some
clipping will occur" will pop up. Click PROCEED.
(6) Save the two halves as BMP pictures, and name them as IMAGE_1 and IMAGE_2
respectively.
Importing the pictures
The pictures can be loaded in two ways, see below:
1. By U Disk
Save IMAGE_1 and IMAGE_2 in the U Disk;
Insert the U Disk in the TF card or the USB control connector on the rear panel;
Note:
U Disk format: FAT32;

The folder should be named M2 in the root directory, which contains IMAGE_1 and

IMAGE_2;
2. By TF card
Use card reader to write the images in the FT card (folder: IMAGE) in the PGM board.
Set as background
If the resolution meets the criteria, follow the steps as below:
(1) Select <Background> in the main menu, select <Background 1>, press the knob to confirm:
->Background 1
(2) Press <Load from U Disk>, select YES to load file.
->Load from U Disk
Background 1
Background 1
Picture
Delete
Chapter 3: Using Your Product
File 1
File 2
Picture
File 1
Yes
49