Table of Contents
Advertisement
3.4.4 Multiview Presets
1. Press any button in Multiview Presets Area to select multiview layouts, including 1P, PIP CENT,
and 3P.
2. User can adjust the position, dimension for the selected layer, and set DSK, BLEND and MASK.
3.4.5 Set the Position
1. Press any button of [A]-[D] in Layer Selection Area, the light flashes when the layer is selected
and can be edited;
2. Press the POS button in Layer Adjustment Area, and enter to the menus as follows:
->H Pos
Use the rotary knob or joystick to adjust the position of the layer.
Push the joystick to the left or right, the horizontal position will be changed.
Push the joystick up or down, the vertical position will be changed.
If improper operation occurs, it can be restored by using RESET.
V Pos
Reset
Chapter 3: Using Your Product
120
329
>>
25
Advertisement
Table of Contents
