Table of Contents
Advertisement
3.3 Using the Menu
Use the menu system for convenient and intuitive operation. M2 OLED display shows the menu
items. The OLED display will show the default state when the menu is not in use, or the
operation has timed out. Using the MENU button and rotary knob in the front panel, the OLED
display will show the corresponding menus.
3.3.1 Understanding the Display
Turn on the the power switch, and the OLED display will show the start-up interface and show
the default menu after completing initialization as below:
Introduce for the above information:
PST Input
1
Show the PST Input signal in use. The related dedicated signal button will be lit.
Output Format
Show the output format of the current signal. To configure output resolutions, use the
2
Output menu. A wide range of resolutions are supported – refer to Specification.
If a # symbol is shown after the resolution, then a custom resolution is being used.
SN
3
Show the serial number of the product.
System Mode
4
Show the current system mode.
Version
5
Show the version of the product.
Chapter 3: Using Your Product
15
Advertisement
Table of Contents
