RGBlink RGB-RD-UM-M2 E003 User Manual page 44

->Overlayer
(4) Set the overlayer width (for example, 200), select <Start Quick Start Mode> and press the
knob to confirm:
->Overlayer
Note:
Overlayer width refers to the width of the overlapped part of two layers (two ports).
(5) Select a background layout mode:
In Layout 1, when <One Input Two Outputs> is selected, the overlapped part is as below:
When <Two Inputs Two Outputs> is selected, the overlapped part is as below:
Normal Mode
Start Quick Start Mode
Chapter 3: Using Your Product
>>
>>
200
>>
38