CanyCom MASAO CMX 2502 Operator's Manual page 91

6
Area
Machine does not
move when drive lever
or pedal is operated.
Machine moves when
drive lever or pedal is
in neutral position.
Transmission jumps
out of gear.
Drive Train
Machine does not turn
smoothly.
Machine does not run
straight.
Brake or parking brake
does not work well, or
Brake
machine pulls to one
side when braked.
Machine vibrates
Chassis
abnormally.
Troubleshooting
Malfunction
Insufficient or
deteriorated HST fluid.
Parking brake is
applied
V-belt is loose.
Other (other than the
above).
HST is out of neutral.
Transmission is not
positively shifted.
Other (other than the
above).
Tires are not properly
inflated.
Differential lock
engaged.
Other (other than the
above).
Tie-rod is not properly
adjusted.
Other (other than the
above).
Brake is not proerly
adjusted.
Brake is wet with water. →Apply brake a few
Other (other than the
above).
Improperly inflated
tires.
Other (other than the
above).
Possible Cause
→Add or change fluid.
→Release the parking
→Adjust V-belt.
→Please contact
→Please contact
→Shift firmly.
→Please contact
→Adjust tire pressure.
→Disengage
→Please contact
→Please contact
→Please contact
→Adjust.
→Please contact
→Adjust tire pressure.
→Please contact
-82-
Corrective Measure
brake.
your CANYCOM
representative.
your CANYCOM
representative.
your CANYCOM
representative.
differential lock
your CANYCOM
representative.
your CANYCOM
representative.
your CANYCOM
representative.
times to dry.
your CANYCOM
representative.
your CANYCOM
representative.
Ref.
Page 60
Page 63
Page 58
Page 64
Page 58