Table of Contents
Advertisement
Dome Lamp
Without
Integral Reading Lamps
To replace a bulb, do the following:
1. From the rear of the dome lamp lens, insert a flat
screwdriver between the roof trim and the lens.
2. With the screwdriver, push the tab at the rear of the
lens forward to release the lens.
3. Pull the lamp lens rearward to release the two
front tabs.
4. Gently remove and replace the bulb(s).
5. Reverse these steps to replace the lens.
Windshield Wiper Blade Replacement
Replacement blades come in different types and are
removed in different ways. For proper type and length,
see Capacities and Specifications in the Index. Here's
how to remove the Shepherd's Hook type:
l..
Pull the windshield wiper arm away from the
windshield.
2. Push the release lever and slide the wiper assembly
3. Install a new blade by reversing Steps 1 and 2.
toward the driver's side of the vehicle.
6-39
Advertisement
Table of Contents
