Table of Contents
Advertisement
3. Push in the SET button at the end of the lever and
release it.
L C .
Take your foot off the accelerator pedal.
Resuming a Set Speed
Suppose you set your cruise control at a desired speed
and
then you apply the brake or clutch pedal. This, of
course, shuts off the cruise control. But
you
don't need
to reset it. Once you're going about 25 mph (40
k m / h )
or more, you
can
briefly move the cruise control switch
from ON to FUA.
You'll go right back up to your chosen speed and
stay there.
If you briefly hold the switch
at WA, the vehicle will
keep going
faster
until you release the
switch or
apply
the brake or clutch pedal. So unless you want to go
faster, do not hold the switch! at WA.
Increasing Speed While Using Cruise Control
There are two ways tu
go
to a higher speed:
a Use the accelerator pedal to get to the higher speed.
Press the SET button at the end of the lever, then
release the button and the accelerator pedal. You'll
now
cruise at the higher speed.
Move the cruise switch from ON to WA. Wold it
there until
you get
up
to
the speed you want, and
then release the switch. To increase your speed in
very small amounts, move the switch to R/A and
then release it. Each time you do this, your vehicle
will go about 1 mph (1.6
km/h)
faster.
2-38
Advertisement
Table of Contents
