Pontiac 1998 Sunfire Owner's Manual page 281

3. To remove the bulb, pull it out.
4. Push in a new bulb.
5. Reverse all steps to replace the taillamp assembly.
Back-up Lamps (Sedan)
If you have a four-door sedan, do the following to
replace a back-up lamp.
1. Use a torx screwdriver to unscrew the back-up
lamp assembly from the fascia.
2. Gently pull the bulb assembly from the fascia.
3. Remove the bulb from the socket by turning it
one-quarter turn to the left.
these steps.
4. Replace the bulb and bulb assembly by reversing
Back-up Lamps (Coupe)
If you have a two-door coupe, do
the
following to
replace a back-up lamp:
1. Open the trunk lid and locate the back-up lamp
assembly on the trunk lid.
2. Gently remove the bulb from the socket by turning it
to the left and pulling it out.
3. Replace the bulb in the socket by aligning the tabs
and turning it to the right.