Table of Contents
Advertisement
6.
Lift the side cover eyelet
(C)
at the rear of the side
boot cover from the snap ball stud
(D).
Raise the
back of the boot side cover to unhook the tab
(A)
from the slot (B) in the quarter
trim panel. Do
the
same on the other side.
7. Store both boot side covers in the trunk.
8. Close the trunk.
9. Raise the rear seatback to the up position. Push the
seat back to make sure it is latched. Ensure that the
rear seatbelts do not become trapped behind the
rear seats.
2-55
Advertisement
Table of Contents
