Table of Contents
Advertisement
Installation instructions
Parts supplied
Drain hose
support (1)
Prior to installation
●
Unpacking and handling
Check packaging and dishwasher for signs of transport damage. If the
dishwasher is in any way damaged, do not install it. Contact the dealer the
dishwasher was purchased from.
Disposal of packaging: some of the packaging is recyclable. Check the symbols
and labels and recycle if possible.
Never lift the dishwasher from the door handle or the top panel. Doing so may
cause damage.
Always be careful with the hoses and power cord at the back of the dishwasher.
Careful handling will prevent damage and malfunction from squashing, kinking or
cuts.
While installing the dishwasher, check the drain hose is not restricted or kinked.
Connections and services
Check that the
replaced by a hai
●
boards should not be used to connect the dishwasher to the power supply.
●
Check that the hoses are long enough to reach the services. If a hose needs
extending, ensure that the extension hose is new and of equal quality and diameter
The dishwasher should not be connected to a water system where the
temperature exceeds 60
The dishwasher must not be connected to an undersink high-pressure "push-
through" type hot water system, as damage to the system will result.
4
Inlet hose (1)
power cord is long enough to reach the outlet. If it isn't, it must be
●
er authorised technician. Extension cords or multi-outlet power
o
C.
Salt funnel(1)
Installation and
User Instructions
Advertisement
Table of Contents
