Table of Contents
Advertisement
Using special salt
As soon as the
low salt indicator is lit on the control panel ,salt should be topped
up. Always refill with special salt immediately before switching on the appliance.This
●
ensures that overrun special salt solution is immediately washed out and does not
corrode the rinsing tank.
Top up the salt as follows:
CAUTION
Only use dishwasher salt. Other product
Any spilled salt causes corrosion. Run a programme after each refill.
●
Water softening system
s can cause damage to the appliance!
●
1.Turn the cap clockwise to open the salt
container.
2.Fill with1 litre of water into the salt container.
3.Fill the tank up with specific salt(water
overflows).
4.
Remove spilled salt from the opening area.
5.Turn the cap counter-clockwise to close
●
the salt container.
6.Press
button for 3 sec after each
refill to reset salt aid indicator.
19
Advertisement
Table of Contents
