Table of Contents
Advertisement
INSTALLATION
(Technical notes for cabinet
fitters)
This dishwasher model can be embedded
in modular furniture, under a counter top, a
continuous counter top or a sink.
The housing dimensions must be the
same as those indicated in the figure 1.
The adjustable feet allow the height of
the machine to be varied from 818 to
898 mm.
Installation under the counter top
Apply the steam protection adhesive
tape under the counter top when it is
made of chipboard or of any other
non-waterproof material (fig. 2).
Insert the dishwasher in the housing "A"
then adjust the height and level it by
means of the adjustable feet (fig. 3-4).
1
Once the height of the dishwasher has
been defined, it is necessary to fix a
13 mm long screws "A" in the
bottom-frame. This should only be done
on the front feet, as indicated in the
figure 4a.
To allow for easy adjustment of the
appliance when it is fitted into the cavity,
SOME MODELS are fitted with an adjustable
foot located centrally at the rear. This
can be adjusted by turning a screw
located at the bottom of the front panel of
the machine, as illustrated in fig. 4b.
5
3
4
4a
A
4b
Advertisement
Table of Contents
