Troubleshooting - Hoover HDPH 2D1049W-80 User Manual

Table of Contents

Advertisement

Troubleshooting

Many occuring problems could be solved by yourself without specific expertise. In
case of a problem please check all shown possibilities and follow below instructions
before you contact an after sales service.
CAUTION
Before maintenance, deactivate the appl
the mains socket.
Electrical equipment should be serviced only by qualified electrical experts,
because improper repairs can cause con
The appliance does not start, or it stops during operation or Indicator is lighted.
Problem
The programme
does not start.
Rinse Aid Indicator
is lighted.
Salt Aid Indicat
or
is lighted.
34
Possible caus
e
Appliance door is open.
Delay start is set.
Mains plug is not connected
in the mains socket.
Fuse in the house circuit is
damaged.
Rinse aid dispenser is empty. Refill Rinse aid until full.
Refill of rinse aid was not
confirmed.
Softener salt is empty.
Refill of salt was not
confirmed.
iance and disconnect the mains plug from
siderable consequential damages.
Possible solution
Close the appliance door.
Refer to displayed time.
Connect the mains plug.
Replace the fuse.
Press
after each refill.
Fill the tank up with specific
salt until full.
Press
after each refill.
button for 3 sec
button for 3 sec

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdph 2d1049b-80

Table of Contents