Installation instructions
Dishwasher using drain hose joiner
onto sink trap/waste tee
If space
is limited
for fixing, push hose
●
through drain hose
support to required
height
Ensure drain
hose is routed
straight to joiner. Remove excess
●
drain hose material if necessary.
Do not shorten the inlet hose.
10
Installer to provide
drain hose joiner to suit
min. 15mm waste tee
step 4
min. radius
200 mm
IMPORTANT!
Do not connect the drain hoses
to a Waste Disposal Unit, as this
type of connection may lead to a
blockage in the drain hoses.
●