Table of Contents
Advertisement
How to Adjust User Preference Settings for LED Models
During the selection of programmes, press and hold
the user preference settings. User preference settings include Water Softener
setting, Buzzer setting, Rinse Aid setting and Memo Mode setting.
1.The appliance is switched on.
2. Press and hold the
flash for 1s and then turn off. If you want to adjust the water softener, press
to scroll the setting between S1 and S6 (the default is S4) as the table below:
P1
0
1
1
1
1
1
If you want to activate/de-activate the buzzer, Press
On (LED on) or Buzzer OFF (LED off).
If you want to change the Rinse AId setting, press
steps between R1 ( minimum dispense) and R4 ( maximum dispense).
The LED displays as follows:
6h
3h
0
0
1
0
1
1
1
1
If you want to Turn On/Turn Off the Memo Mode, press
6h Status Indicators
0
1
3.Press and hold the
LED is OFF.
*0 -
*1 -
LED is ON.
for 5s to enter t he user setting mode, and all LEDs will
P2
P3
0
0
0
0
1
0
1
1
1
1
1
1
9h
Rx level
0
R1
Empty
0
R2
3ml
0
R3
5ml default
1
R4
6ml
Memo mode
OFF
default
ON
for 3s to save th
for about 5 seconds to enter
P4
Zoom
0
0
0
0
0
0
0
0
1
0
1
1
e setting and exit the setting mode.
●
Before first Use
Sx level
S1
S2
S3
S4 default
S5
S6
to toggle Buzzer
to change the setting in
as follows:
●
27
Advertisement
Table of Contents
