Care and cleaning
To remove the drain filter, turn the filter anti-clockwise to release, then lift out.
Once the drain filter has been removed you can lift the filter plate out.
Rinse them thoroughly under running water and then replace.
Replace the filters correctly after cleaning, making sure the filter plate is flush with
the dishwasher base.
IMPORTANT !
When cleaning the underside of the filter plate, take care handling its sharp outer
edge.
Cleaning the spray arms
Limescale and food particles in the wash water can block the holes in the spray
●
arms and the arm mountings. Clean these parts about once a month, or more often
should the need arise.
Cleaning the upper spray arm/head
Do not remove the upper spray arm for cle
brush,
or if heavily soiled or blocked use a dishwasher cleaner/descaler following
the manufacturer's instructions.
●
32
●
aning. Clean with a small plastic-bristled
●
Drain filter
Filter plate