Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hoover HDPH 2D1049W-80
Summary of Contents for Hoover HDPH 2D1049W-80
- Page 1 User Manual Dishwasher ● HDPH 2D1049W-80 HDPH 2D1049B-80 ●...
-
Page 2: Table Of Contents
Thank you for purchasing a Hoover product Please read t hese instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the ● appliance and ensure safe and proper installation, use and maintenance. -
Page 3: Safety And Warnings
Safety and warnings Your dishwasher has been carefully designed to operate safely during normal dishwashing procedures. Please keep the following instructions in mind when you are using your dishwasher. ● WARNING Electrical shock hazard Before installing the dishwasher, remove the house fuse or open the circuit breaker. This appliance must be earthed. - Page 4 Safety and warnings Use only detergents or rinse aid recommended for use in a domestic dishwasher and keep them out of reach of children. Check that the detergent dispenser is empty after the completion of each wash program. ● When loading items to be washed, locate sharp items so that they are not likely to damage the dishwasher and load sharp knives with the handle up to reduce the risk of cut-type injuries.
- Page 5 Safety and warnings Keep the area around/underneath your appliance free from the accumulation of combustible materials, such as lint, paper, rags and chemicals. Operational safety instructions Open the door very carefully if the dishwasher is in operation. There is a risk of ●...
-
Page 6: Installation Instructions
Installation instructions Parts supplied Drain hose Inlet hose (1) Installation and Salt funnel(1) support (1) User Instructions Prior to installation ● Unpacking and handling Check packaging and dishwasher for signs of transport damage. If the dishwasher is in any way damaged, do not install it. Contact the dealer the dishwasher was purchased from. - Page 7 Installation instructions Product dimensions ● ●...
- Page 8 Installation instructions ● Overall height of product with top panel in place 846 - 866** with top panel removed* 816 - 836** ● l l a l l a Depth of open door (measured from front of kickstrip) Inside height of cavity with top panel in place 850 - 870** with top panel removed*...
- Page 9 Installation instructions Cavity preparation Preparing the product and cabinetry The top panel may be removed to suit underbench cavity height. See the illustrations below. Unscrew the top panel at the rear either side lide backward (2) 20-30mm, then ●...
- Page 10 Installation instructions IMPORTANT! To prevent possible steam damage to the cabinetry, ensure that any bare wood surrounding the dishwasher is sealed with an oil-based paint or moisture-proof polyurethane. MPORTANT! The power outlet must be ● located in a cabinet adjacent to the dishwasher cavity.
- Page 11 Installation instructions Plumbing and drainage options. Determine which is more suitable Dishwasher and Ø 38 mm Standpipe If space is limited for fixing, push hose ● through drain hose support to required ● height ● 38mm step 4 min.
- Page 12 Installation instructions Dishwasher using drain hose joiner onto sink trap/waste tee Installer to provide drain hose joiner to suit If space is limited min. 15mm waste tee for fixing, push hose ● through drain hose support to required height ...
- Page 13 Installation instructions Connect inlet hose to cold water min. 10mm “3/4” BSP connector Ensure the supplied rubber No leaks! washer is fitted inside the ● coupling. Tighten coupling with spanner. ● Plumbing -- Wa ter inlet connection ●...
- Page 14 Installation instructions Plug product in Electrical connection ● The dishwasher must not be connected to the electrical supply while installation is being carried out. Ensure all domestic wiring is properly earthed. Check the rating label (located on the left-hand side of the dishwasher’s stainless steel inner door) and ensure that the voltage and frequency values for the current in the house correspond to those on the rating label.
- Page 15 Installation instructions Final checklist To be completed by the installer Check all parts are installed. ● Ensure that all panels and parts thereof are secure and final electrical tests have been conducted in accordance with local electrical regulations. ● Check that the dishwasher is level. If necessary, adjust the levelling feet slightly. To ensure optimum performance, the dishwasher should not be inclined more than .
-
Page 16: Product Description
Product Description Upper basket Rating label Utensil tray Salt container ● 3. Upper spray arm Detergent dispenser ● Lower spray arm Rinse aid dispenser Filters Lower basket Cutlery basket*... -
Page 17: Overview Of Programmes
Overview of programmes ● 1. ON / OFF Button 7. Time & Info Display Programme Select Button Speed Up Function Indicator Start Delay Button Dry Function Indicator Additional Function Button Add Dish Indicator Child Lock Lack Salt And Rinse Aid Reset Button Start / Reset Button Additional function button permit to activate Exp function or Multi-tab function. - Page 18 Overview of programmes ime & Info display During any selection the display shows by flashing related information like : ● Programme cycle time Programme start delay time Error codes and service information After start of an operation it displays without flashing: Remaining time in hours of a delayed programme starts, e.g.
- Page 19 Overview of programmes Programmes ● Programmes Type of food residue Type of load 50°C 298min Universal 60°C 115min Intensive 70°C 130min Prewash 45°C 20min Rapid 32min Special 45°C 72min Total Care 45°C 98min 1) Use this programme to quickly rinse the dishes. T his prevents the remaining food to bond on the dishes and bad odours to come out from the appliance.
-
Page 20: Water Softening System
Water softening system To ensure good washing results, the dishwasher requires soft water.Hard water can be detrimental to the performance of your dishwasher. Over time , glassware washed ● in hard water will become opaque and dishes will become spotted or covered in a white film. - Page 21 Water softening system Using special salt As soon as the low salt indicator is lit on the control panel ,salt should be topped up. Always refill with special salt immediately before switching on the appliance.This ● ensures that overrun special salt solution is immediately washed out and does not corrode the rinsing tank.
-
Page 22: Using Rinse Aid
Using rinse aid We highly recommend using liquid rinse aid regularly to get the best drying results.Rinse aid gives a streak-free, sparkling clean look to glass and chinaware. In addition, it prevents metal from tarnishing. When to refill the rinse aid dispenser When rinse aid level becomes low,the digtial will scrolling display ADD RINSE AID to remind you to refill the dispenser. -
Page 23: Utensils
Utensils IMPORTANT! Never put highly absorbent materials, such as sponges and towels in your dishwasher. Do not put dishes or cutlery that have been soiled by tobacco ash, wax, lubrica ting grease or paint in your dishwasher. ● Cutlery and silverware All cutlery and silverware should be rinsed immediately after use to prevent tarnishing caused by some foods. -
Page 24: Loading Utensils
Loading utensils If the tableware or cookware rack is burnt, scorched,sticky, and other food which is very difficult to removed, it is advisable to soak it for a period of time before washing it or pre-dispose it with a dish cloth or else it will be hard to clean. Remove any large food particles before placing dishes in the dishwasher. - Page 25 Loading utensils To adjust the upper rack: IMPORTANT! Before you adjust its height, make sure the basket is empty. Remove: Replace: End Cap Rollers Rail Rail Rollers 1.Fully extend the upper rack and rotate open the two plastic end caps on the front of the rails.
- Page 26 Loading utensils Cutlery basket Mix spoons with other cutlery to prevent them to bond together. Use the grid element in order to separate the cutlery. Place Cutlery with the handles down for better washing results. If long items may block the spray arms find a horizontal positioning in the upper basket.
-
Page 27: How To Make Savings
How to make savings... -
Page 28: Adding Detergent
Adding detergent IMPORTANT! Only use detergents recommended for automatic dishwashers. Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children and infirm persons away from the dishwasher when it is open. Check that the detergent dispenser is empty after completion of each wash programme. -
Page 29: Before First Use
Before first Use How to Adjust User Preference Settings for LED Models During the selection of programmes, press and hold for about 5 seconds to enter the user preference settings. User preference settings include Water Softener setting, Buzzer setting, Rinse Aid setting and Memo Mode setting. 1.The appliance is switched on. - Page 30 Before first Use How to Adjust User Preference Settings for DIGIT Models During the selection of programmes, press and hold the program selection key for 5s to enter the user setting mode. User setting mode includes Language setting, Water Softener setting, Buzzer setting,Rinse Aid setting and Memo Mode setting. 1.The appliance is switched on.
-
Page 31: Daily Use
Daily Use Start a Programme 1. Open the door and Press the ON/OFF button to turn the dishwasher on. *The display will show the wash programme time ● 2.Press to select the program you want on the dishwasher control panel. 3. - Page 32 Daily Use Cancel a Delayed Start When the current reservation time is disp layed for 23h, or other time. Press the reservation button again to cancel the reservation. ● Cancel Start Delay / Programme 1. Press the for about 3 second. The start delay is cancelled.
-
Page 33: Care And Cleaning
Care and cleaning Over time, food residue or limescale deposits may accumulate inside your dishwasher.These may reduce efficiency, and food residue may produce a bad odour. Inspect and clean your dishwasher regularly. IMPORTANT ! Before any cleaning or maintenance, always disconnect the dishwasher from the power supply, turn off the water supply, and wait until all parts of the dishwasher have cooled. - Page 34 Care and cleaning To remove the drain filter, turn the filter anti-clockwise to release, then lift out. Once the drain filter has been removed you can lift the filter plate out. Rinse them thoroughly under running water and then replace. Replace the filters correctly after cleaning, making sure the filter plate is flush with the dishwasher base.
- Page 35 Care and cleaning Cleaning the centre spray arm ● To remove the centre spray arm, carefully unscrew its locking nut. Rinse the spray arm thoroughly under running water, then refit. IMPORTANT ! Make sure you twist the locking nut on the centre spray arm firmly back on the water supply tube.Check that the centre spray arm is firmly locked in place and ●...
-
Page 36: Troubleshooting
Troubleshooting Many occuring problems could be solved by yourself without specific expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. CAUTION Before maintenance, deactivate the appl iance and disconnect the mains plug from the mains socket. - Page 37 Troubleshooting Error codes on the display Problem Possible cause Possible solution Open the water tap. Note: Whenever Error is Water tap is closed. solved switch off the appliance and restart the programm. Water inlet hose has a kink or Make sure that the position of Acoustic alarm, a bend.
- Page 38 Troubleshooting Washing Results are not satisfactory Problem Possible cause Possible solution Filters are clogged. Clean the filters. Make sure that the filters Filters are not correctly are correctly assembled and assembled and installed. installed. R e m o v e r e m a i n i n g f o o d Spray arms are clogged.
- Page 39 Troubleshooting Problem Possible caus Possible solution ● Increase the released quantity Rinse aid dosage is too low. Dry water drop of rinse aid. stains on glasses Quality of rinse aid or Cleaning product too old; and dishes. ● Multitab.stains on glasses change the product.
-
Page 40: Technical Data
Technical Data Product fiche (according EU 1059/2010) Hoover Suppliers name or trade mark ● Supplier´s model identifier HDPH 2D1049W-80 HDPH 2D1049B-80 Rated capacity in standard -place settings Energy efficiency class 1) Annual energy consumption (AEc) in kW h/year 2) Energy consumption (Et) of the 0.75...