Unit Specifications; General Instructions - Kasco 2400A Operation & Maintenance Manual

UNIT SPECIFICATIONS

Model
2400A/C
3400A/C
3400HA/HC
4400A/C
4400HA/HC

GENERAL INSTRUCTIONS

Inspect the Shipment
Immediately inspect your shipment for any visible damages. Any damage should be reported immediately
to your carrier and Kasco.
Assembly & Installation
Please see the proper assembly and installation Instructions enclosed in this manual. Each is specific for
your model and size of aerator or circulator. Note: It is extremely important to test the GFI breaker in the
control panel upon each installation/re-installation of the unit to ensure proper functioning.
Use and Operation
Kasco Aerators are designed and engineered for continuous duty, such as on fish farms or other aquacul-
ture applications, or on-demand use, as needed in a recreational water feature. During flotation operation,
the water is pulled from 360° around the unit and from below the unit. Following installation, your Kasco
aerator or circulator is ready for immediate use. Make sure to keep the motor housing clean from hard wa-
ter deposits and/or algae. (See Maintenance Recommendations.) Kasco aerators/circulators are lightweight,
energy efficient, and easy to install and operate.
SUGGESTED TOOLS & SUPPLIES
#2 Phillips-head screwdriver
3/8" socket or wrench
9/16" socket or wrench
Anchors or stakes for installing unit
12" pieces of 1" galvanized pipe (optional, see page 12)
Voltage Operating Amps
Single-phase Aerators and Circulators
110-120 5.0
110-120 6.7
208-240 3.4
110-120 11.3
208-240 5.7
Locked Rotor Amps
12
18
9
40
20
Aerator Circulator

 
 
2 or 3 3
2 or 3 3
1/2HP-1HP AERATOR & CIRCULATOR MANUAL
Back to Contents
3