Table of Contents
Advertisement
SAFETY FIRST
•
NEVER enter the water with the electrical equipment connected and/or in operation.
•
Stay clear of all moving parts.
•
NEVER run the unit out of water. This will damage the equipment and pose a danger to the operator.
•
Use extreme caution around water, especially cold water.
•
NEVER lift or drag the unit by the power cord. Always use the ropes or mount to remove it from the
water.
•
Do not use waders in deep water or in areas with drop-offs, drastic slopes, or soft bottom material.
•
Do not use boats that tip easily for unit installation (such as canoes).
•
Follow all boating safety rules and regulations, including wearing a Personal Flotation Device.
•
The unit is supplied with an internal grounding conductor. To reduce the risk of electrical shock, be
certain that the unit is plugged in/connected to an approved GFCI-protected circuit.
•
Means for disconnection must be incorporated in the fixed wiring, in accordance with local and national
wiring rules.
•
Consult a qualified electrician for electrical installation.
UNIT SPECIFICATIONS
Pattern
Model
Size
Height Width
2400VFX
5 ft.
15 ft.
3400VFX
5.5 ft.
21 ft.
3400HVFX
5.5 ft.
21 ft.
4400VFX
8 ft.
26 ft.
4400HVFX
8 ft.
26 ft.
WARNINGS:
Moving Machinery
Operating
Voltage
Amps
110-120
6
110-120
7
208-240
4
110-120
11
208-240
6
Shock Hazard
Locked
Control Panel Connection /
Unit Connection
Rotor Amps
Single-Phase Units
20
C-25 plug in / Plug into C-25
24
C-25 plug in / Plug into C-25
12
Hardwire C-85 / Hardwire into C-85
39
C-25 plug in / Plug into C-25
19
Hardwire C-85 / Hardwire into C-85
2400 - 4400 VFX FOUNTAIN MANUAL
Back to Contents
1
Advertisement
Table of Contents
