Table of Contents
Advertisement
Rewinding the tape
To rewind the tape, press the "REW" button. The
radio will automatically begin playing while the tape
is rewinding. The light above the "REW" button
will blink while in the rewind mode. Press "REW"
again or press the "TAPE" button to stop
rewinding.
Using the "SEEK" function with your cassette
tape player
While in the tape mode, push the right a side of
the "SEEK" button to seek forward to the next
selection on the tape. Push the left b side to
restart a currently playing tape selection.
Using the "Blank Skip" function with your
cassette tape player
Press the "Blank Skip" button to activate the blank
skip mode. After approximately 20 seconds of blank
program, the tape will seek forward to the next
program.
Using the "SCAN" function with your cassette
tape player
Pushing the "SCAN" button will begin the forward
scan mode on the tape currently playing, stopping
on each tape selection for approximately eight
seconds.
To stop the scan mode on the presently sampled
tape selection, press the "SCAN" button or the
"TAPE" button.
How to change the side of the tape being
played
The alternate side of the tape can be selected by
pressing the "SIDE 1-2" button.
41
Advertisement
Table of Contents
