1. Manuals
  2. Brands
  3. Lincoln Manuals
  4. Automobile
  5. Town Car 1998
  6. Owner's manual

Lincoln Town Car 1998 Owner's Manual

Lincoln town car 1998
Hide thumbs
Table of Contents

Advertisement

Quick Links

www.carburetor-manual.com
Would you like some Free Manuals?
http://carburetor-manual.com/free-shop-manual-club-t-13.html
Also visit
http://freeshopmanual.com
for more Free Manuals
Also Visit my website for 7 FREE Download Manuals starting
with this one.
"The ABC's of Carburetion"
Click Here Now
file:///C|/Documents%20and%20Settings/Tim/Desktop/carburetor-manual-welcome/index.htm[4/25/2009 11:42:20 AM]

Advertisement

Table of Contents
loading

Related Manuals for Lincoln Town Car 1998

Summary of Contents for Lincoln Town Car 1998

  • Page 1 www.carburetor-manual.com Would you like some Free Manuals? http://carburetor-manual.com/free-shop-manual-club-t-13.html Also visit http://freeshopmanual.com for more Free Manuals Also Visit my website for 7 FREE Download Manuals starting with this one. "The ABC's of Carburetion" Click Here Now file:///C|/Documents%20and%20Settings/Tim/Desktop/carburetor-manual-welcome/index.htm[4/25/2009 11:42:20 AM]...

  • Page 2: Table Of Contents

    Contents Before driving Introduction Instrumentation Controls and features Seating and safety restraints Starting and driving Starting Driving Roadside emergencies Servicing Maintenance and care Capacities and specifications Reporting safety defects Index All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company.

  • Page 3: Introduction

    Introduction ICONS Indicates a warning. Read the following section on Warnings for a full explanation. Indicates vehicle information related to recycling and other environmental concerns will follow. Correct vehicle usage and the authorized disposal of waste cleaning and lubrication materials are significant steps towards protecting the environment.

  • Page 4: Instrumentation

    Instrumentation Panel dimmer switch (pg. 24) Instrument cluster (pg. 6) Headlamp control Gearshift lever (pg. 24) (pg. 103) CHECK TRAC PUSH ON < FILL ON LEFT km/h SERVICE ENGINE SOON PANEL MIST RESUME NEXT SET ACCEL MODE COAST TEMP *if equipped Turn signal and Speed control wiper/washer...
  • Page 5 Instrumentation Electronic sound system; refer to Audio Guide (pg. 35) Clock (pg. 34) Passenger side air bag (pg. 77) BASS TREB FADE TAPE SEEK TUNE SCAN AUTO SIDE 1 2 COMP SHUFF SELECT RESET FRONT REAR AUTO Climate control Traction control systems switch* (pg.

  • Page 6: Warning Lights And Chimes

    Instrumentation WARNING LIGHTS AND CHIMES CHECK TRAC TRUNK AJAR DOOR AJAR WASHER FUEL ECON AVG CIRCLE LTR/100km TRAC OFF AIR SUSPENSION FUEL REMAIN SLOWLY DIST TO EMPTY AVG SPEED O/D OFF TRAC ACTIVE TRIP A B km MILES/GAL SPEED CONTROL COMPASS <...
  • Page 7 Instrumentation will usually be drivable and will not require towing. What you should do if the Service Engine Soon light illuminates Light turns on solid: This means that the OBD II system has detected a malfunction. Temporary malfunctions may cause your Service Engine Soon light to illuminate.
  • Page 8 Instrumentation Light is blinking: Engine misfire is occurring which could damage your catalytic converter. You should drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced at the first available opportunity. Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior floor...
  • Page 9 Instrumentation parking brake indicates low brake fluid level. Anti-lock brake system (ABS) Momentarily illuminates when the ignition is turned on and the engine is off. If the light remains on, continues to flash or fails to illuminate, have the system serviced immediately.
  • Page 10 Instrumentation Engine oil pressure Illuminates when the oil pressure falls below the normal range. Stop the vehicle as soon as safely possible and switch off the engine immediately. Check the oil level and add oil if needed. Refer to Engine oil in the Maintenance and Care chapter.

  • Page 11: Air Suspension

    Instrumentation Trunk ajar If the trunk is not completely TRUNK AJAR DOOR AJAR closed, this light comes on when CIRCLE you turn the ignition to ON. With TRAC OFF AIR SUSPENSION SLOWLY the ignition ON, this light will flash five times and sound a tone for one second, then remain on.

  • Page 12: Speed Control

    Instrumentation O/D off Illuminates when the transmission TRUNK AJAR DOOR AJAR control switch (TCS) has been CIRCLE pushed. When the light is on, the TRAC OFF AIR SUSPENSION SLOWLY transmission does not shift into overdrive. If the light does not come on when the TCS is O/D OFF TRAC ACTIVE...
  • Page 13 Instrumentation Safety belt warning chime Chimes to remind you to fasten your safety belts. For information on the safety belt warning chime, refer to the Seating and safety restraints chapter. Supplemental restraint system (SRS) warning chime For information on the SRS warning chime, refer to the Seating and safety restraints chapter.

  • Page 14: Fuel Gauge

    Instrumentation GAUGES CHECK TRAC TRUNK AJAR DOOR AJAR WASHER FUEL ECON AVG CIRCLE LTR/100km TRAC OFF AIR SUSPENSION FUEL REMAIN SLOWLY DIST TO EMPTY AVG SPEED O/D OFF TRAC ACTIVE TRIP A B km MILES/GAL SPEED CONTROL COMPASS < FILL ON LEFT km/h SERVICE...
  • Page 15 Instrumentation Speedometer Indicates the current vehicle speed. km/h Engine coolant temperature gauge Indicates the temperature of the engine coolant. At normal operating temperature, the needle remains within the normal area (the area between the “H” and “C”). If it travels past the “H,” the engine is overheating.
  • Page 16 Instrumentation ELECTRONIC MESSAGE CENTER The electronic message center only works when the ignition is in the ON position. The message center allows you to: • see problems such as door ajar TRUNK AJAR DOOR AJAR and trunk ajar. CIRCLE • see the compass direction. TRAC OFF AIR SUSPENSION SLOWLY •...
  • Page 17 Instrumentation Selectable features Select Each press of the SELECT control WASHER FUEL ECON AVG will select a different feature as LTR/100km FUEL REMAIN follows: DIST TO EMPTY • FUEL ECON AVG AVG SPEED TRIP A B • FUEL REMAIN • DIST TO EMPTY km MILES/GAL •...
  • Page 18 Instrumentation to Compass calibration adjustment. Most geographic areas (zones) have a magnetic north compass point that varies slightly from the northerly direction on maps. This variation is four degrees between adjacent zones and will become noticeable as the vehicle crosses multiple zones.
  • Page 19 Instrumentation Compass calibration adjustment Perform this adjustment in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 1. Start the vehicle. 2.
  • Page 20 Instrumentation displayed for the following reasons: • your vehicle was not perfectly level during fill-up • differences in the automatic shut-off points on the fuel pumps at service stations • variations in top-off procedure from one fill-up to another • rounding of the displayed values to the nearest 0.1 liter (gallon) Checking your highway fuel economy using the electronic...
  • Page 21 Instrumentation 3. Press the RESET control to SELECT RESET clear the system memory. • Actual highway fuel economy is now displayed. This current average measure will change as the speed control system changes the engine speed to maintain a constant vehicle speed.
  • Page 22 Instrumentation not show the addition of fuel for a few kilometers (miles). The DTE function will flash for 5 seconds and sound a tone for 1 second when you have approximately: • 80 km (50 miles) left before you run out of fuel •...
  • Page 23 Instrumentation When this function is displayed, FUEL ECON AVG press the RESET control to change FUEL REMAIN the message center display from DIST TO EMPTY metric to English units or from AVG SPEED English to metric units. TRIP A B...

  • Page 24: Controls And Features

    Controls and features PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel during headlight PANEL and parklamp operation. • Push up to brighten. • Push down to dim. AUTOLAMP CONTROL The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control.

  • Page 25: Controls And Features

    Controls and features Daytime running light (Canadian vehicles only) The daytime running light system turns the headlamps on, with a reduced light output, when: • the vehicle is running, • the parking brake is released, • the headlamp system is in the OFF position or AUTOLAMP position when the autolamp function has turned on the...
  • Page 26 Controls and features Flash to pass Pull toward you to activate and release to deactivate. CLIMATE CONTROL SYSTEM Electronic Automatic Temperature Control (EATC) system The EATC system will maintain a FRONT selected temperature and automatically control airflow. You REAR can override automatic operation AUTO with any of the override controls, the fan speed control or steering...
  • Page 27 Controls and features Automatic operation Press AUTO and select the desired temperature. The selected temperature and the word AUTO will appear in the display window. The EATC system will either heat or cool to achieve the selected temperature. The system will automatically determine fan speed, airflow location and if fresh outside air or recirculated air is required.
  • Page 28 Controls and features To control the temperature, select any temperature between 18°C FRONT (65°F) and 29°C (85°F) by pressing the temperature control. REAR For continuous maximum cooling, push the temperature control until 16°C (60°F) is shown in the display window. The EATC will continue maximum cooling (disregarding the displayed temperature) until a warmer...
  • Page 29 Controls and features display. Refer to Electronic Message Center in the Instrumentation Chapter. Fan speed ( When AUTO is pressed, fan speed is adjusted automatically for existing conditions. You can override fan speed at any time. To control fan speed manually, press the fan control to cancel automatic fan speed operation or use the AUTO...
  • Page 30 Controls and features clear water drips on the ground under the air conditioner drain while the system is working and even after you have stopped the vehicle. Under normal conditions, your vehicle’s climate control system should be left in any position other than MAX A/C or OFF when the vehicle is parked.
  • Page 31 Controls and features mode. The air will be heated or cooled based on the temperature selection. For added customer comfort, the air distributed through the floor ducts will be slightly warmer than the air sent to the instrument panel registers. •...
  • Page 32 Controls and features 10°C (50°F) or higher, the air conditioner will automatically dehumidify the air to prevent fogging. • OFF-Outside air is shut out and the fan will not operate. For short periods of time only, use this mode to prevent undesirable odors from entering the vehicle.
  • Page 33 Controls and features moving. The readings that you get may not agree with temperatures given on the radio due to differences in vehicle and station locations. Operating tips • In humid weather, select FRONT before driving. This will prevent your windshield from fogging.
  • Page 34 Controls and features reduce your ability to see through your windshield. Also, avoid placing small objects on top of your instrument panel. These objects can fall down into the defroster outlets and block airflow and possibly damage your climate control system. REAR WINDOW DEFROSTER The rear defroster control is located on the climate control...
  • Page 35 Controls and features Press the left control to decrease the time displayed. AUDIO SYSTEM Refer to the “Audio Guide” in your owner portfolio. POSITIONS OF THE IGNITION 1. ACCESSORY, allows the electrical accessories such as the radio to operate while the engine is not running.
  • Page 36 Controls and features The valet key (marked “valet”) will actuate doors and ignition only. TILT STEERING Pull the tilt steering control toward you to move the steering wheel up or down. Hold the control while adjusting the wheel to the desired position, then release the control.
  • Page 37 Controls and features WINDSHIELD WIPER/WASHER CONTROLS Rotate the windshield wiper control to the desired interval, low or high speed position. The bars of varying length are for intermittent wipers. When in this position rotate the control upward for fast intervals and downward for slow intervals.
  • Page 38 Controls and features To turn speed control off • Press OFF or • Turn off the vehicle ignition. Once speed control is switched off, the previously programmed set speed will be erased. To set a speed • Press SET ACC/SET ACCEL. For speed control to operate, the speed control must be ON and the vehicle speed must be...
  • Page 39 Controls and features If your vehicle slows down more than 16 km/h (10 mph) below your set speed on an uphill, your speed control will disengage. This is normal. Pressing RES/RSM/RESUME will re-engage Do not use the speed control in heavy traffic or on roads that are winding, slippery, or unpaved.
  • Page 40 Controls and features To set a lower set speed • Press and hold CST/COAST. Release the control when the desired speed is reached or • Press and release CST/COAST. ACCEL Each press will decrease the set speed by 1.6 km/h (1 mph) or COAST •...
  • Page 41 Controls and features Pressing OFF will erase the previously programmed set speed. To return to a previously set speed • Press RES/RSM/RESUME. For RES/RSM/RESUME to operate, the vehicle speed must be faster than 48 km/h (30 mph). ACCEL COAST Indicator light Indicator message This message is displayed in the SPEED CONTROL...
  • Page 42 Controls and features Radio control features • Press MEM/NEXT to select a preset station from memory. • Press BAND/MODE to select AM, FM1, FM2, TAPE or CD (if NEXT equipped). • Press VOL up or down to adjust the volume. MODE Climate control features •...
  • Page 43 Controls and features When programming your HomeLink Universal Transmitter, you will be operating the garage door or gate. Be sure that people and objects are out to the way to prevent potential harm or damage. Do not use the HomeLink Universal Transmitter with any garage door opener that lacks safety stop and reverse features as...
  • Page 44 Controls and features 3. Using both hands, press the hand-held transmitter control and the desired channel control on the HomeLink Universal Transmitter. Do not release the controls until step 4 has been completed. 4. Hold down both controls until the red light begins to flash slowly and then rapidly.
  • Page 45 Controls and features Operating the HomeLink Universal Transmitter Once programmed, the HomeLink Universal Transmitter can be used in place of hand-held transmitters. To operate, simply press the appropriate channel control on the transmitter (the red light will illuminate, indicating the signal is being transmitted).
  • Page 46 Controls and features 3. Press the programmed HomeLink control in the vehicle until the training light on the garage door receiver turns solid (1-2 seconds). Release the HomeLink control and repress to turn off the training light. 4. Press the HomeLink control again.
  • Page 47 Controls and features To close the moon roof: • Press and hold the front portion of the control. • To close from the vent position, press and hold the rear portion of the control. AUTOMATIC DIMMING INSIDE REAR VIEW MIRROR (IF EQUIPPED) Your vehicle is equipped with an inside rear view mirror which has...
  • Page 48 Controls and features TRUNK REMOTE CONTROL The remote trunk control is located on the driver’s door trim panel and can be operated whenever the vehicle is in P (Park). FUEL DOOR RELEASE Your vehicle is equipped with a locking fuel door. To open the door, press the control located on the door.
  • Page 49 Controls and features POWER WINDOWS Express down To make the driver window open WINDOW LOCK fully without holding the window control, press the driver window control completely down and release quickly. Depress again to stop window operation. Window lock The window lock feature allows WINDOW LOCK only the driver to operate the power windows.
  • Page 50 Controls and features POWER SIDE VIEW MIRRORS The ignition key must be in ACC or ON to adjust the power side view mirrors. To adjust your mirrors: 1. Select L to adjust the left mirror or R to adjust the right mirror. 2.
  • Page 51 Controls and features CHILDPROOF DOOR LOCKS When these locks are set, the rear doors cannot be opened from the inside. The rear doors can be opened from the outside when the LOCKED doors are unlocked. VERROUILLEE The childproof locks are located on rear edge of each rear door and must be set separately for each door.
  • Page 52 Controls and features The memory seat positions are also recalled when you press your remote entry transmitter UNLOCK control. To program the memory seat to remote entry transmitter, refer to Remote entry system in the Controls and features chapter. CENTER CONSOLE Your vehicle may be equipped with a variety of console features.
  • Page 53 Controls and features POSITIVE RETENTION FLOOR Position the floor mat so that the eyelet is over the pointed end of the retention post and rotate forward to lock in. Make sure that the mat does not interfere with the operation of the accelerator or the brake pedal.
  • Page 54 Controls and features Locking the doors Press this control to lock all doors. The horn will chirp and the parklamps/taillamps will flash to confirm that the control was pressed. This feature can be turned on/off through the following procedure: You must complete steps 1-5 within 30 seconds or the procedure will have to be repeated.
  • Page 55 Controls and features Opening the trunk Press the control once to open the trunk. Be certain the trunk is closed before driving your vehicle. The trunk may appear closed, but it may not be latched. Failure to do so may cause objects to fall out of the trunk or block rear view vision.
  • Page 56 Controls and features operating range will allow you to be up to 10 meters (33 feet) away from your vehicle. A decrease in operating range can be caused by: • battery weakness due to time and use • weather conditions •...
  • Page 57 Controls and features press any button on all transmitters (up to four). When completed, switch the ignition to OFF. All transmitters must be programmed at the same time. Illuminated entry The interior lamps illuminate when the remote entry system is used to unlock the door(s) or sound the personal alarm.
  • Page 58 Controls and features • you exceed 5 km/h (3 mph). The autolock feature repeats when: • the ignition key remains in the ON position • a door is opened and then closed • the vehicle is in a forward gear, •...
  • Page 59 Controls and features Memory seat/mirrors feature (if equipped) The remote keyless entry system can also control the memory seats/mirrors feature. With this feature, the first two programmed transmitters will recall a different memory position. Press the control once to unlock the driver’s door and move the memory features to the corresponding memory position,...
  • Page 60 Controls and features Deactivating the memory seat/mirrors feature 1. Press the SET control. 2. Press any button on the remote entry transmitter. 3. Within five seconds, press the SET control again. Manually moving any seat or mirror during these steps will cancel the programming procedure.
  • Page 61 Controls and features SecuriLock keys for more information. If one or both of your SecuriLock keys are lost or stolen and you want to ensure the lost or stolen key will not operate your vehicle, bring your vehicle and all available SecuriLock keys to your dealership for reinitialization.
  • Page 62 Controls and features procedure. To program a new SecuriLock key yourself, you will need two previously programmed SecuriLock keys (keys that already operate your vehicle’s engine). If two previously programmed SecuriLock keys are not available (one or both of your original keys were lost or stolen), you must bring your vehicle to your dealership to have the spare...
  • Page 63 Controls and features 3. Within five seconds of turning the ignition to OFF, insert the second previously programmed SecuriLock key into the ignition switch and turn the ignition from OFF to RUN (maintain ignition in RUN for at least one second but no more than 5 seconds).

  • Page 64: Seating And Safety Restraints

    Seating and safety restraints SEATING Four-way head restraints (if equipped) The head restraints can be moved in four directions: • up and down • forward or backward Adjusting the power front seats – door mounted controls The controls for the power seats are located on the inside of each front door.

  • Page 65: Seating And Safety Restraints

    Seating and safety restraints Press the control to recline the seatback forward or backward. (if equipped) Press to move the seat forward or backward. Press to move the front portion of the seat cushion up or down. Press to move the rear portion of the seat cushion up or down.
  • Page 66 Seating and safety restraints Adjusting the power seats – seat mounted controls Never adjust the driver’s seat or seatback when the vehicle is moving. The power seat controls are located on the side of the driver’s seat. Press to raise or lower the seat, or to move the seat forward or backward.
  • Page 67 Seating and safety restraints Using the power lumbar support The power lumbar control is located on the outboard side of the seat. Press one side of the control to adjust firmness. Press the other side of the control to adjust softness. Using the manual recline function (if equipped) Never adjust the driver’s...
  • Page 68 Seating and safety restraints Easy access/easy out feature (if equipped) This feature automatically moves the driver’s seat backward when: • the transmission is in N (Neutral) or P (Park) • the key is removed from the ignition cylinder The seat will move two inches forward (to the original position) when: •...
  • Page 69 Seating and safety restraints All occupants of the vehicle, including the driver, should always wear their safety belts. It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
  • Page 70 Seating and safety restraints Combination lap and shoulder belts 1. To fasten, insert the tongue into the slot in the buckle. 2. To unfasten, push the red release button and remove the tongue from the buckle. The front and rear outboard safety restraints in the vehicle are combination lap and shoulder belts.
  • Page 71 Seating and safety restraints receives an impact of 8 km/h (5 mph) or more, the combination safety belts will lock to help reduce forward movement of the driver and passengers. Automatic locking mode In this mode, the shoulder belt is automatically pre-locked.
  • Page 72 Seating and safety restraints • Grasp the shoulder portion and pull downward until the entire belt is extracted. • Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode.
  • Page 73 Seating and safety restraints Front safety belt height adjustment Your vehicle has safety belt height adjustments for the driver and front passenger. Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder. To lower the shoulder belt height, push the button and slide the height control down.
  • Page 74 Seating and safety restraints Insert the tongue into the correct buckle. To lengthen the belt, turn the tongue at a right angle to the belt and pull across your lap until it reaches the buckle. To tighten the belt, pull the loose end of the belt through the tongue until it fits snugly across the hips.
  • Page 75 Seating and safety restraints belt extension only if the safety belt is too short for you when fully extended. Do not use extensions to change the fit of the shoulder belt across the torso. Safety belt warning light and indicator chime The seat belt warning light illuminates in the instrument cluster and a chime sounds to...
  • Page 76 Seating and safety restraints damage or improper operation is noted. Failure to replace the safety belt assembly under the above conditions could result in severe personal injuries in the event of a collision. Refer to Cleaning and maintaining the safety belts in the Maintenance and care section.
  • Page 77 Seating and safety restraints Important supplemental restraint system (SRS) precautions The supplemental restraint system is designed to: • work with the safety belt to protect the driver and right front passenger. • reduce certain upper body injuries. Failure to follow these instructions will affect the performance of the safety belts and increase the risk of personal...
  • Page 78 Do not attempt to service, repair, or modify the Air Bag Supplemental Restraint System or its fuses. See your Ford or Lincoln-Mercury dealer. Children and air bags For additional important safety information, read all information on safety restraints in this guide.
  • Page 79 Seating and safety restraints How does the air bag supplemental restraint system work? The SRS is designed to activate when the vehicle sustains sufficient longitudinal deceleration. The fact that the air bags did not inflate in a collision does not mean that something is wrong with the system.
  • Page 80 Seating and safety restraints If the air bag is inflated, the air bag will not function again and must be replaced immediately. If the air bag is not replaced, the unrepaired area will increase the risk of injury in a collision. The SRS consists of: •...
  • Page 81 Seating and safety restraints A difficulty with the system is indicated by one or more of the following: • The readiness light will either flash or stay lit. • The readiness light will not illuminate immediately after ignition is turned on. •...
  • Page 82 Seating and safety restraints them in safety seats made especially for children. Check your local and state or provincial laws for specific requirements regarding the safety of children in your vehicle. Never let a passenger hold a child on his or her lap while the vehicle is moving.
  • Page 83 Seating and safety restraints the child closer to the center of the vehicle may help provide a good shoulder belt fit. If the shoulder belt cannot be properly positioned: • move the child to one of the seats with a lap belt only (if equipped) or •...
  • Page 84 Seating and safety restraints special needs of your child with your pediatrician. SAFETY SEATS FOR CHILDREN Child and infant or child safety seats Use a safety seat that is recommended for the size and weight of the child. Carefully follow all of the manufacturer’s instructions with the safety seat you put in your vehicle.
  • Page 85 Seating and safety restraints Attaching safety seats with tether straps. Carefully follow all of the manufacturer’s instructions included with the safety seat you put in your vehicle. If you do not install and use the safety seat properly, the child may be injured in a sudden stop or collision.
  • Page 86 Seating and safety restraints 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together. 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions.
  • Page 87 Seating and safety restraints 5. To put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard. 6. Allow the belt to retract. The belt will click as it retracts to indicate it is in the automatic locking mode.
  • Page 88 Seating and safety restraints able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat steps two through nine. Check to make sure the child seat is properly secured before each use. Installing a child safety seat in the center seating position with adjustable lap belt 1.
  • Page 89 Tether anchorage hardware kits (part number 613D74) including instructions, may be obtained at no charge from any Ford or Lincoln-Mercury dealer. All vehicles built for sale in Canada include a tether anchor hardware kit. Be sure to follow the child safety seat manufacturer’s instructions.
  • Page 90 Starting PREPARING TO START YOUR VEHICLE Engine starting is controlled by the ignition system. This system meets all Canadian Interference-Causing Equipment standard requirements regulating the impulse electrical field strength of radio noise. When starting a fuel-injected engine, avoid pressing the accelerator before or during starting.
  • Page 91 Starting Do not start your vehicle in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the engine. See Guarding against exhaust fumes in this chapter for more instructions. If you smell exhaust fumes inside your vehicle, have your dealer inspect your vehicle...
  • Page 92 Starting 3. Make sure the parking brake is set. 4. Make sure the gearshift is in P (Park). 5. Turn the key to 4 (ON) without turning the key to 5 (START). CHECK TRAC TRUNK AJAR DOOR AJAR WASHER FUEL ECON AVG CIRCLE LTR/100km TRAC OFF AIR SUSPENSION...
  • Page 93 Starting Make sure the corresponding lights illuminate briefly. If a light fails to illuminate, have the vehicle serviced. • If the driver’s safety belt is fastened, the light ( ) will not illuminate. STARTING THE ENGINE 1. Turn the key to 5 (START) without pressing the accelerator pedal and release as soon as the engine starts.
  • Page 94 Starting heater-defroster system to respond quickly. They are strongly recommended if you live in a region where temperatures reach -23°C (-10°F) or below. For best results, plug the heater in at least three hours before starting the vehicle. Using the heater for longer than three hours will not harm the engine, so the heater can be plugged in the night before...
  • Page 95 Starting Have the exhaust and body ventilation systems checked whenever: • the vehicle is raised for service. • the sound of the exhaust system changes. • the vehicle has been damaged in a collision. Important ventilating information If the engine is idling while the vehicle is stopped in an open area for long periods of time, open the windows at least 2.5 cm (one...
  • Page 96 Driving BRAKES Your brakes are self-adjusting. Refer to the “Service Guide” for scheduled maintenance. Occasional brake noise is normal and often does not indicate a performance concern with the vehicle’s brake system. In normal operation, automotive brake systems may emit occasional or intermittent squeal or groan noises when the brakes are applied.

  • Page 97: Driving

    Driving shudder while braking, felt mainly in the steering wheel, the vehicle most likely needs service. The ABS operates by detecting the onset of wheel lock up during brake applications and compensating for this tendency. The front wheels are prevented from locking even when the brakes are firmly applied.
  • Page 98 Driving enable you to avoid obstacles and bring the vehicle to a controlled stop. • We recommend that you familiarize yourself with this braking technique. However, avoid taking any unnecessary risks. Parking brake with auto-release Apply the parking brake whenever the vehicle is parked.
  • Page 99 Driving Your vehicle has an automatic parking brake release. To release the parking brake: 1. Turn the ignition to the RUN position. 2. Press the brake pedal. 3. Move the gearshifter from the P (Park) position to one of the forward gears (the parking brake will not release automatically when you shift into reverse).
  • Page 100 Driving Wheel-speed sensors allow excess rear wheel spin to be detected by the Traction Control portion of the ABS computer. Any excessive wheel spin is controlled by automatically applying and releasing the rear brakes in conjunction with engine torque reductions. Engine torque reduction is realized via the fully electronic spark and fuel injection systems.
  • Page 101 Driving portion of the system will shut down to prevent the rear brakes from overheating. A limited Traction Control function using only engine torque reduction will still control wheels from over-spinning. When the rear brakes have cooled down, the system will again function normally.
  • Page 102 Driving left for more than a few seconds when the engine is running. This action could damage the power steering pump. Speed sensitive steering The steering in your vehicle is speed sensitive. At high speeds, steering assist will decrease to improve steering feel.

  • Page 103: Transmission Operation

    Driving The air suspension shut-off switch is located on the left side of the AIR SUSPENSION SWITCH trunk. If this switch is in the OFF INTERRUPTEUR DE position, the rear air suspension LA SUSPENSION will not operate. PNEUMATIQUE WARNING On vehicles equipped with To prevent sudden Air Suspension, turn OFF vehicle movement,...
  • Page 104 Driving is possible that a fuse has blown and the vehicle’s brakelamps may not be operating properly. Refer to Fuses and relays in the Roadside emergencies chapter. Do not drive your vehicle until you verify that the brakelamps are working. If your vehicle gets stuck in mud or snow it may be rocked out by shifting from forward and reverse...
  • Page 105 Driving Hold the brake pedal down while you move the gearshift lever from position to position. If you do not hold the brake pedal down, your vehicle may move unexpectedly and injure someone. P (Park) Always come to a complete stop before shifting into P (Park).
  • Page 106 Driving Drive – Not shown on the display. Activate by pressing the transmission control switch on the end of the gearshift lever with the gearshift in the position. The TCIL will illuminate in the instrument cluster. Transmission operates in gears one through three.
  • Page 107 Driving 1 (First) Use 1 (Low) to provide maximum engine braking on steep downgrades. Upshifts can be made by shifting to 2 (Second) or to (Overdrive). Selecting 1 (Low) at higher speeds causes the transmission to shift to a lower gear, and will shift to 1 (Low) after vehicle decelerates to the proper speed.
  • Page 108 It does not come from the factory fully equipped to tow. No towing packages are available through Ford or Mercury/Lincoln dealers. Do not tow a trailer until your vehicle has been driven at least 3 200 km (2 000 miles).
  • Page 109 Driving Do not exceed the GVWR or the GAWR specified on the Safety Compliance Certification Label. Towing trailers beyond the maximum recommended gross trailer weight could result in engine damage, transmission/axle damage, structural damage, loss of control, and personal injury. Preparing to tow Use the proper equipment for towing a trailer, and make sure it...
  • Page 110 Driving Trailer brakes Electric brakes and manual, automatic or surge-type brakes are safe if installed properly and adjusted to the manufacturer’s specifications. The trailer brakes must meet local and Federal regulations. Do not connect a trailer’s hydraulic brake system directly to your vehicle’s brake system.
  • Page 111 Driving • Anticipate stops and brake gradually. Servicing after towing If you tow a trailer for long distances, your vehicle will require more frequent service intervals. Refer to the Severe Duty Schedule in your “Service Guide” for more information. Trailer towing tips •...
  • Page 112 Driving must park on a grade, place wheel chocks under the trailer’s wheels. Launching or retrieving a boat When backing down a ramp during boat launching or retrieval, • Do not allow the static water level to rise above the bottom edge of the rear bumper and •...
  • Page 113 Driving If driving through deep or standing water is unavoidable, proceed very slowly. Never drive through water that is higher than the bottom of the hubs (truck)/wheel rims (car). Once through the water, always try the brakes. Wet brakes do not stop the vehicle as effectively as dry brakes.

  • Page 114: Roadside Emergencies

    Roadside emergencies HAZARD FLASHER Use only in an emergency to warn traffic of vehicle breakdown, approaching danger, etc. The hazard flashers can be operated when the ignition is off. • Slide the hazard flasher control to the right to activate the hazard flashers simultaneously.

  • Page 115: Roadside Emergencies

    Roadside emergencies The fuel pump shut-off switch is located on the left side of the trunk behind the trunk liner. FUSES AND RELAYS Fuses If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse.
  • Page 116 Roadside emergencies Standard fuse amperage rating and color Fuse rating Color 5 amp 7.5 amp Brown 10 amp 15 amp Light blue 20 amp Yellow 20 amp fuse link Light blue 25 amp Natural 30 amp Light green 30 amp fuse link Pink 40 amp fuse link Green...
  • Page 117 Roadside emergencies Passenger compartment fuse panel The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses. To remove a fuse use the fuse puller tool provided on the fuse panel cover.
  • Page 118 Roadside emergencies The fuses are coded as follows. Fuse/Relay Fuse Amp Description Location Rating Lighting Control Module (LCM) EATC Blower Motor Lighting Control Module (LCM) 7.5A Instrument Cluster 7.5A Lighting Control Module (LCM) EATC, Heated Seats Lighting Control Module (LCM), Day/Night Sensor/Amplifier Shift Lock, Speed Control, Air Suspension, Steering Wheel Rotation...
  • Page 119 Roadside emergencies Fuse/Relay Fuse Amp Description Location Rating EATC, Clock, Instrument Cluster, PCM 7.5A Lighting Control Module (LCM), ABS, Shift Lock Multi-Function Switch Multi-Function Switch, High Mounted Stop Lamps Datalink Connector, I/P Cigar Lighter Front Radio Control Unit Lighting Control Module (LCM) Digital Transmission Range (DTR) Sensor Fuel Filler Door Release Switch...
  • Page 120 Roadside emergencies Power distribution box The power distribution box is located in the engine compartment. The power distribution box contains high-current fuses that protect your vehicle’s main electrical systems from overloads. Always disconnect the battery before servicing high current fuses. Always replace the cover to the Power Distribution Box before reconnecting the...
  • Page 121 Roadside emergencies The high-current fuses are coded as follows. Fuse/Relay Fuse Amp Description Location Rating 50A** Ignition Switch 40A** Ignition Switch 50A** Cooling Fan 30A** PCM Power Relay 40A** I/P Fuse Panel, Fuses 10, 19, 21, 23, 25, 27, 32 30A** Starting System 50A**...
  • Page 122 Roadside emergencies Fuse/Relay Fuse Amp Description Location Rating Relay 1 — Fuel Pump Relay Relay 2 — A/C Clutch Relay Relay 3 — PCM Power Relay Relay 4 — Air Suspension Relay Relay 5 — Rear Defrost Relay * Mini Fuses ** Maxi Fuses CHANGING THE TIRES If you get a flat tire while driving, do not apply the brake heavily.
  • Page 123 Roadside emergencies When driving with the temporary spare tire do not: • exceed 80 km/h (50 mph) under any circumstances • load the vehicle beyond maximum vehicle load rating listed on the Safety Compliance Label • tow a trailer • use tire chains •...
  • Page 124 Roadside emergencies 3. Remove the spare tire, jack and lug wrench. 4. Remove the center ornament from the aluminum wheel with the tapered end of the wheel nut wrench that came with your vehicle. Insert and twist the handle, then pry against the wheel. 5.
  • Page 125 Roadside emergencies 6. Locate the jack notch next to the door closest to the tire you are changing, then place the jack on the frame rail directly behind the notch. Turn the jack handle clockwise until the wheel is completely off the ground. 7.
  • Page 126 Roadside emergencies JUMP STARTING YOUR VEHICLE The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicle damage. Do not push start your vehicle. You could damage the catalytic converter. Batteries contain sulfuric acid which burns skin, eyes, and clothing.
  • Page 127 Roadside emergencies 4. Check all battery terminals and remove any excessive corrosion before you attach the battery cables. 5. Turn the heater fan on in both vehicles to protect any electrical surges. Turn all other accessories off. Connecting the jumper cables 1.
  • Page 128 Roadside emergencies Jump starting 1. Start the booster vehicle and run the engine at moderately increased speed. 2. Start the engine of the vehicle with the discharged battery. 3. Once the engine has been started, run both vehicles for a further three minutes before disconnecting the leads.
  • Page 129 Roadside emergencies WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or, if you are a member, your roadside assistance center. It is recommended that your vehicle be towed with a wheel lift or flatbed equipment. Do not tow with slingbelt equipment.
  • Page 130 Roadside emergencies you have. A towing manual is available from Ford Motor Company for all authorized tow truck operators. Have your tow truck driver refer to this manual for proper hook-up and towing procedures for your vehicle.

  • Page 131: Maintenance And Care

    Maintenance and care SERVICE RECOMMENDATIONS To help you service your vehicle: • We highlight do-it-yourself items in the engine compartment for easy location. • We provide a “Service Guide” which makes tracking routine service easy. If your vehicle requires professional service, your dealership can provide necessary parts and service.
  • Page 132 Maintenance and care • Do not work on a vehicle with the engine running in an enclosed space, unless you are sure you have enough ventilation. • Keep all lit cigarettes, open flames and other lit material away from the battery and all fuel related parts.
  • Page 133 Maintenance and care Working with the engine on 1. Set the parking brake and ensure the gearshift is securely latched in P (Park). 2. Block the wheels to prevent the vehicle from moving unexpectedly. Do not start your engine with the air cleaner removed and do not remove it while the engine is running.
  • Page 134 Maintenance and care IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 4.6L 2V engine 1. Transmission fluid dipstick 2. Brake fluid reservoir 3. Engine oil fill cap 4. Engine oil dipstick 5. Power steering fluid reservoir 6. Windshield washer fluid reservoir 7. Air filter assembly 8.
  • Page 135 Maintenance and care ENGINE OIL Checking the engine oil Check the engine oil each time you fuel your vehicle. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait a few minutes for the oil to drain into the oil pan.
  • Page 136 Maintenance and care • If the oil level is between the MIN and MAX marks, the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below the MIN mark, add enough oil to raise the level within the MIN-MAX range.
  • Page 137 Maintenance and care Engine oil recommendations Look for this certification mark. Ford oil specification is WSS-M2C153-G. Use SAE 5W-30 motor oil certified for gasoline engines by the American Petroleum Institute. Do not use supplemental engine oil additives, oil treatments or engine treatments.
  • Page 138 Maintenance and care Ford production and aftermarket (Motorcraft) oil filters are designed for added engine protection and long life. If a replacement oil filter is used that does not meet Ford material and design specifications, startup engine noises or knock may be experienced.
  • Page 139 Maintenance and care Brake fluid is toxic. If you use a brake fluid that is not DOT 3, you will cause permanent damage to your brakes. Do not let the reservoir for the master cylinder run dry. This may cause the brakes to fail.
  • Page 140 Maintenance and care ENGINE COOLANT Check the level of the coolant in the reservoir at least once a month. Be sure to read and understand Precautions when servicing your vehicle in this chapter. If the engine coolant has not been checked for a long period of time, the engine coolant reservoir may eventually empty.
  • Page 141 Maintenance and care recovery reservoir-DO NOT ADD DIRECTLY TO THE RADIATOR. Add straight water only in an emergency, but you should replace it with a 50/50 mixture of coolant and distilled water as soon as possible. Check the coolant level in the coolant recovery reservoir the next few times you drive the vehicle.
  • Page 142 The use of an improper coolant may void your warranty of your vehicle’s engine cooling system. Recycled engine coolant Ford Motor Company recommends that Ford and Lincoln-Mercury dealers use recycled engine coolant produced by Ford-approved processes. Not all coolant recycling processes produce coolant which meets Ford specification ESE-M97B44–A, and...
  • Page 143 Maintenance and care refer to Refill capacities in the Capacities and specifications chapter. Have your dealer check the engine cooling system for leaks if you have to add more than a liter (quart) of engine coolant per month. Severe winter climate If you drive in extremely cold climates (less than –36°C [–34°F]), it may be necessary to increase the...
  • Page 144 Maintenance and care How fail-safe cooling works If the engine overheats, the engine will automatically switch from eight to alternating four cylinder operation. Each disabled cylinder acts as an air pump and cools the engine. When this occurs: • the engine coolant temperature gauge will move to the H (hot) area •...
  • Page 145 Maintenance and care • Immediately turn the engine off to prevent severe engine damage. • Wait for the engine to cool. • Check the coolant level. CHECKING AND ADDING POWER STEERING FLUID Check the power steering fluid at least twice a year. If adding fluid is necessary, use only MERCON ATF power steering fluid.
  • Page 146 Maintenance and care 5. If the fluid is low, add fluid in small amounts, continuously checking the level until it reaches the range between the MIN and MAX lines. Be sure to put the cap back on the reservoir. TRANSMISSION FLUID Checking and adding automatic transmission fluid Follow the scheduled service...
  • Page 147 Maintenance and care notice some sign of fluid leakage. Transmission fluid should be checked at normal operating temperatures 66°C-77°C (150°F-170°F) on a level surface. The normal operating temperature can be reached after approximately 32 km (20 miles) of driving. The transmission fluid should be in this range if at normal operating temperature (66°C-77°C [150°F-170°F]) (see figure to the...
  • Page 148 Maintenance and care 4. Remove the dipstick, wiping it clean with a clean, dry lint free rag. 5. Install the dipstick making sure it is fully seated in the filler tube. 6. Remove the dipstick and inspect the fluid level. The fluid level should be within the top hole area on the dipstick.
  • Page 149 Maintenance and care BATTERY Your vehicle may be equipped with a Superstart maintenance-free battery. If the original equipment battery needs replacing, it may be replaced with a low-maintenance battery. The low-maintenance battery normally does not require additional water during its life of service.
  • Page 150 Maintenance and care quantity of grease to the top of each battery terminal to help prevent corrosion. If your battery has a cover/shield, make sure it is reinstalled after the battery is replaced. Because your vehicle’s engine is electronically controlled by a computer, some control conditions are maintained by power from the battery.
  • Page 151 Maintenance and care • Always dispose of automotive batteries in a responsible manner. Follow your community’s standards for disposal. Call your local recycling center to find out more about recycling automotive batteries. WINDSHIELD WIPER BLADES Check the wiper blades at least twice a year or when they seem less effective.
  • Page 152 Maintenance and care To replace the wiper blades: 1. Pull the wiper arm away from the windshield and lock into the service position. 2. Turn the blade at an angle from the wiper arm. Push the lock pin with a screwdriver to release the blade and pull the wiper blade down toward the windshield to remove it from the arm.
  • Page 153 Maintenance and care U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford to give you the following information about tire grades exactly as the government has written it. Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course.
  • Page 154 Maintenance and care The traction grade assigned to this tire is based on braking (straight ahead) traction tests and does not include cornering (turning) traction. Temperature A B C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under...
  • Page 155 Maintenance and care SERVICING YOUR TIRES Checking the tire pressure • Use an accurate tire pressure gauge. • Check the tire pressure when tires are cold, after the vehicle has been parked for at least one hour or has been driven less than 5 km (3 miles).
  • Page 156 Maintenance and care • Four tire rotation (for vehicles with aluminum wheels) • Five tire rotation (for vehicles with steel wheels and full size spare tires)
  • Page 157 Maintenance and care Replacing the tires Replace the tires when the wear band is visible through the tire treads. Failure to follow these precautions may adversely affect the handling of the vehicle and make it easier to lose control and roll over. Tires that are larger or smaller than your vehicle’s original tires may also affect the accuracy of...
  • Page 158 Maintenance and care Follow these guidelines when using snow tires and chains: • Use only SAE Class S chains. • Install chains securely, verifying that the chains do not touch any wiring, brake lines or fuel lines. • Drive cautiously. If you hear the chains rub or bang against your vehicle, stop and re-tighten the chains.
  • Page 159 Maintenance and care If you do not use the proper fuel cap, the pressure in the fuel tank can damage the fuel system or cause it to work improperly in a collision. The fuel system may be under pressure. If the fuel cap is venting vapor or if you hear a hissing sound, wait until it stops before completely...
  • Page 160 Maintenance and care clothing and wash skin thoroughly with soap and water. • If fuel is splashed in the eyes, remove contact lenses, flush with water for 15 minutes and seek medical attention. • Be particularly careful if you are taking “Antabuse”...
  • Page 161 Maintenance and care Repair of damage caused by using a fuel that your vehicle was not designed for may not be covered by your warranty. Octane recommendations Your vehicle is designed to use regular unleaded with an (R+M)/2 octane rating of 87. Gasolines labeled as “Regular”...
  • Page 162 Maintenance and care gasoline. “Premium” gasoline is not recommended because it may cause these problems to become more pronounced. If the problems persist, see your dealer or a qualified service technician. The American Automobile Manufacturers Association (AAMA) issued a gasoline specification to provide information on high quality fuels that optimize the performance of your vehicle.
  • Page 163 Maintenance and care 2. Each time you fill the tank, record the amount of fuel added (in liters or gallons). 3. After at least three to five fuel tank fill-ups, fill the fuel tank and record the current mileage reading. 4.
  • Page 164 Maintenance and care • Have the services listed in your “Service Guide” performed according to the specified schedule. The Scheduled Maintenance Services listed in the “Service Guide” are required because they are considered essential to the life and performance of your vehicle and to its emissions system.
  • Page 165 Maintenance and care If you smell exhaust fumes of any kind inside your vehicle, have the dealer inspect and fix your vehicle immediately. Do not drive if you smell exhaust fumes. These fumes are harmful and could kill you. Do not make any unauthorized changes to your vehicle or engine.
  • Page 166 Maintenance and care not pass the I/M test with the “check engine/service engine soon” light on. If the vehicle’s powertrain system or its battery has just been serviced, the OBD-II system is reset to a “not ready for I/M test” condition.
  • Page 167 Maintenance and care • Backup lamps • License plate lamp Do not remove lamp bulbs unless they will be replaced immediately. If a bulb is removed for an extended period of time, contaminants may enter the lamp housings and affect performance. Replacing headlamp bulbs Handle a halogen headlamp bulb carefully...
  • Page 168 Maintenance and care 4. Remove headlamp by taking the pins out. Pull headlamp forward to access headlamp connector. 5. Disconnect the electrical connector from the bulb by pulling the connector rearward. 6. Remove the bulb retaining ring by rotating it counterclockwise (when viewed from the rear) to free it from the bulb socket, and by sliding the ring off the plastic...
  • Page 169 Maintenance and care 2. Slip the bulb retaining ring over the plastic base until it contacts the rear of the socket by rotating it clockwise until you feel a “stop.” 3. Push the electrical connector into the rear of the plastic base until it snaps, locking it into position.
  • Page 170 Maintenance and care The horizontal aim must be adjusted first. You will need one 4 mm box wrench or open end wrench. The following procedure assumes that the vehicle’s front structure is properly aligned. If the vehicle has been in an accident requiring the front end of the vehicle to be repaired, the horizontal indicator should be recalibrated by the...
  • Page 171 Maintenance and care 2. With the hood open, locate the bubble level vertical aim indicator. It is visible when viewed from the above rear of the headlamp. 3. Use a 4 mm wrench to turn the vertical adjusting screw until the reference mark on the reflector extension aligns with the “0”...
  • Page 172 Maintenance and care CLEANING AND CARING FOR YOUR VEHICLE Refer to the “Customer Assistance Guide” for a list of Ford-approved cleaners, polishes and waxes. Washing your vehicle Wash your vehicle regularly with cold or lukewarm water. Never use strong detergents or soap. If your vehicle is particularly dirty, use a quality car wash detergent.
  • Page 173 Maintenance and care alcohol with a clean cloth to remove. Use tar remover to remove any tar spots. Repairing paint chips Minor scratches or paint damage from road debris may be repaired with touch-up paint, repair foil or aerosol paint spray from the Ford accessory line.
  • Page 174 Maintenance and care • Do not spray with cold water to avoid cracking the engine block or other engine components. • Cover the highlighted areas to prevent water damage when cleaning the engine. • Never wash or rinse the engine while it is running;...
  • Page 175 Maintenance and care Cleaning the exterior lamps Wash with the same detergent as the exterior of your vehicle. Use glass cleaner or tar remover if necessary. To avoid scratching the lamps, do not use a dry paper towel, chemical solvents or abrasive cleaners.
  • Page 176 Maintenance and care Cleaning and maintaining the safety belts Clean the safety belts with a mild soap solution recommended for cleaning upholstery or carpets. Do not bleach or dye the belts, because these actions may weaken the belt webbing. Check the safety belt system periodically to make sure there are no nicks, wear or cuts.
  • Page 177 Maintenance and care The type of scrubbing pad is very critical because the common 3M “Scotch Brite” green pad is too aggressive and will damage the leather surface • Spray a small amount of the leather cleaner on the pad and rub the area to be cleaned with the pad using a circular motion.
  • Page 178 Maintenance and care many local automotive after market stores. 3M “Type T” Clean And Finish Scrubbing Pads (UPC 04011–01276) are available through your local 3M distributor. Call 1–800–742–9649 for the nearest distributor in your area. PART NUMBER PART NAME (Obtain Locally) Tanners Preserve Leather Cleaner (Obtain Locally) 3M Type T Clean and Finish...

  • Page 179: Capacities And Specifications

    Capacities and specifications MOTORCRAFT PART NUMBERS Component 4.6L engine Air filter FA-1032 Fuel filter FG-800A Battery (standard) BXT-65-650 Battery (optional) BXT-65-750 Oil filter FL-820-S PCV valve EV-98 Spark plugs* AWSF-32PP** * Refer to Vehicle Emissions Control Information (VECI) decal for spark plug gap information.

  • Page 180: Capacities And Specifications

    Capacities and specifications REFILL CAPACITIES Fluid Ford Part Name Capacity Engine oil (includes Motorcraft 5W30 filter change) Super Premium Motor 4.7L (5.0 quarts) Brake fluid Ford High Performance DOT 3 Fill to line in reservoir Brake Fluid Power steering fluid Motorcraft MERCON Fill to line in reservoir Transmission fluid...
  • Page 181 Capacities and specifications LUBRICANT SPECIFICATIONS Item Ford part name Ford part Ford number specification Brake master High Performance C6AZ- ESA-M6C25-A, cylinder DOT 3 Motor 19542-AB DOT 3 Vehicle Brake Fluid Door Silicone Lubricant C0AZ-19553- ESR-M13P4-A weatherstrips AA and D7AZ- 19553-AA Engine coolant Ford Premium E2FZ-19549-...
  • Page 182 Capacities and specifications ENGINE DATA Engine 4.6L engine Cubic inches Horsepower-single exhaust 200 @ 4250 rpm Horsepower-single exhaust 205 @ 4250 rpm Horsepower-dual exhaust 215 @ 4500 rpm Horsepower-dual exhaust 220 @ 4500 rpm Torque-single exhaust 265 lbs. ft. @ 3000 rpm Torque-single exhaust 280 lbs.
  • Page 183 Capacities and specifications...

  • Page 184: Vehicle Identification Number

    Capacities and specifications IDENTIFYING YOUR VEHICLE Safety compliance label The National Highway Traffic MFD. BY FORD MOTOR CO. IN U.S.A. Safety Administration Regulations DATE: XXXXX GVWR:XXXXX LB/ XXXXX KG require that a Safety Compliance FGAWR: XXXXXX/XXXXXXX RGAWR: XXXXXXX/XXXXXXX THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL Certification Label be affixed to a MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE vehicle and prescribe where the...

  • Page 185: Reporting Safety Defects

    Reporting safety defects REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle has a defect that could cause a crash, or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Ford Motor Company.
  • Page 186 Index Aiming headlamps ....169 Climate control system Air bag supplemental restraint automatic temperature system ..........76 control ....26,27,28,29,32,33 and child safety seats ....78 Clock ..........34 description ........77 Compass, electronic disposal ........81 calibration .........19 indicator light ......80 set zone adjustment ....18 passenger air bag .....79 Controls ........52 Air suspension Daytime running light system ...25...

  • Page 187: Index

    Index Headlamps ........24 heated ........50 autolamp system .......24 side view mirrors (power) ..50 flashing ........26 Moon roof ........46 high beam .........25 Odometer ........14 Heating ........26 Panic alarm feature, remote High beams entry system ........55 indicator light ......9 Parking brake ......98 Hood Parts (see Motorcraft parts) ..179 release lever ......133...
  • Page 188 Index precautions when servicing ...131 Trunk Speed control ......37 using the remote entry canceling a set speed ....40 system to open ....48,55 indicator light ......41 Turn signal resuming a set speed ....41 lever ...........36 tap up/tap down ....39,40 Universal transmitter ....42 turning off .........38 erasing channels .......46 Speed sensitive steering ..102...

  • Page 189: Filling Station Information

    Filling station information Recommended fuel Refer to Octane recommendations in the Maintenance and care chapter Fuel tank capacity 71.9L (19.0 gallons) Engine oil capacity (with 4.7L (5.0 quarts). Use Motorcraft 5W30 filter change) Super Premium Motor Oil, Ford Specification WSS-M2C153-G Automatic transmission 13.1L (13.9 quarts).

This manual is also suitable for:

1998 navigator

Table of Contents