Installing The Soft Top - Jeep 2010 Wrangler Owner's Manual

Installing the Soft Top

NOTE: The following procedures are for first time set
up only. For future soft top procedures, refer to "Soft
Top" in this section.
1. Locate and remove the following items prior to hard
top removal:
• Right and left door frames
• Door frame attachment knobs (four for two-door
models, six for four-door models)
• Right and left quarter windows
• Rear window
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157
2. Remove the hard top. Refer to "Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Removal"
in this section.
3. Install the door frames. Refer to "Door Frame" in this
section.
4. If the soft top has been removed, follow these steps to
reinstall the soft top. If the soft top is on the vehicle,
proceed to step #5.
3