Replacing The Rear Seat - Two Door Models; 60/40 Split Folding Rear Seat - Four Door Models - Jeep 2010 Wrangler Owner's Manual

3. Fold the rear seat forward following steps 1 through 3
under "Fold and Tumble Rear Seat" in this section.
4. Press down on the release bar on each side, and pull
the seat out and away from the lower bracket.
5. Remove the seat from the vehicle.
Release Bar Location
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133
Replacing the Rear Seat — Two Door Models
Reverse the steps for removing the seat.
WARNING!
• To help protect against personal injury, passengers
should not be seated in the rear cargo area with the
rear seat folded down or removed from the ve-
hicle.
• The rear cargo space is intended for load carrying
purposes only, not for passengers who should sit
in seats and use seat belts.
60/40 Split Folding Rear Seat — Four Door
Models
To provide additional storage area, each rear seat can be
folded flat to allow for extended cargo space and still
maintain some rear seating room.
3