Rear Window Features - Hard Top Only; Rear Window Wiper/Washer - If Equipped - Jeep 2010 Wrangler Owner's Manual

238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
REAR WINDOW FEATURES — HARD TOP ONLY
Rear Window Wiper/Washer — If Equipped
A rotary switch on the center portion of the control lever
(located on the right side of the steering column) controls
the operation of the rear wiper/washer function.
Rear Wiper/Washer Control
Rotate the switch upward to the first detent posi-
tion for rear wiper operation.
Rotate the switch upward past the first detent to
activate the rear washer. The washer pump will
continue to operate as long as the switch is held.
Upon release, the wiper will cycle two to three times
before returning to the set position.
If the rear wiper is operating when the ignition is turned
to the LOCK position, the wiper will automatically return
to the "Park" position. When the vehicle is restarted, the
wiper will resume function at whichever position the
switch is set at.