Jeep 2010 Wrangler Owner's Manual page 157

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4. Disconnect the knuckles from the left and right metal
pivot brackets. Remove the soft top from the vehicle and
store in a clean, dry location.
NOTE: To aid in disconnecting the knuckles, you may
carefully tap on the knuckles using a rubber mallet.
5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx
head driver. Recover and re-zip the sports bar cover.
Store the pivot brackets and screws in a safe place.
6. Reinstall the hard top. Refer to "Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Installa-
tion" in this section.