AEG BSE577221M User Manual page 40

40 www.aeg.com
Error codes
C2
C3
F102
F102
12:00
If the display shows an error code that is
not in this table turn the house fuse off
and on to restart the oven. If the error
code recurs contact an Authorised Serv‐
ice Centre.
Cleaning
Problem
There is water in
the oven cavity.
- indicator is off. There is enough
- indicator is on. There is enough
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an
Authorised Service Centre.
You removed the
Food Sensor plug
from the socket.
The oven door is
closed or the door
lock is not broken.
The oven door is
closed.
The door lock is not
broken.
There was a power
cut. Set the time of
day.
Check if...
There is not too
much water in the
water tank.
water in the water
tank. If water starts
to leak in the oven,
and the indicator is
still off contact an
Authorised Service
Centre.
water in the tank. If
the tank is full and
the indicator is still
on contact an Au‐
thorised Service
Centre.
Cleaning
The steam cooking
does not work.
The steam cooking
does not work.
It takes more than
three minutes to
empty the water
tank or the water
leaks from the
steam inlet opening.
Other problems
Problem
The appliance is ac‐
tivated and does not
heat up. The fan
does not operate.
The display shows
"Demo".
There is no lime
residue in the steam
inlet opening.
There is water in
the water tank.
There is no lime
residue in the steam
inlet opening. Clean
the water tank.
Check if...
The Demo Mode is
deactivated:
1. Turn off the
oven.
2. , ,
- press and hold
at the same
time.
3. The first digit on
the display and
Demo flash.
4. Turn the knob
for temperature
to enter the
code: 2468.
Press: . The
next digit flash‐
es.