Installing The Soft Top - Jeep 2007 Wrangler Owner's Manual

120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx
head driver. Recover and re-zip the sports bar cover.
Store pivot brackets and screws in a safe place.
6. Reinstall the hard top. Refer to "Hard Top — Hard Top
Installation" in this section.

Installing the Soft Top

NOTE: The following procedures are for first time set
up only. For future soft top procedures, refer to "Soft
Top" in this section.
1. Locate and remove the following items prior to hard
top removal:
• Right and left door frames
• Door frame attachment knobs (4 for 2 door models,
6 for 4 door models)
• Right and left quarter windows
• Rear window
2. Remove the hard top. Refer to "Hard Top — Hard Top
Removal" in this section.
3. Install the door frames. Refer to "Door Frame" in this
section.