Driveline And Steering Component Lubrication; Body Lubrication - Jeep 2007 Wrangler Owner's Manual

Hide thumbs Also See for 2007 Wrangler:
Table of Contents

Advertisement

364 MAINTAINING YOUR VEHICLE
WARNING!
Fluid level should be checked on a level surface with
the engine off to prevent injury from moving parts,
and to insure accurate fluid level reading. Do not
overfill. Use only the manufacturer's recommended
fluid.
If necessary, add fluid to restore to the proper indicated
level. With a clean cloth, wipe any spilled fluid from all
surfaces. Refer to Fluids, Lubricants, and Genuine Parts
for correct fluid type.
NOTE: Upon initial start-up in cold weather, the power
steering pump may make noise for a short period of time.
This is due to the cold, thick fluid in the steering system.
This noise should be considered normal, and does not in
any way damage the steering system.

Driveline And Steering Component Lubrication

All driveline and steering components are sealed and do
not require lubrication. Driveshafts are not serviceable.

Body Lubrication

Locks and all body pivot points, including such items as
seat tracks, doors, tailgate and hood hinges, should be
lubricated periodically to assure quiet, easy operation
and to protect against rust and wear. Prior to the appli-
cation of any lubricant, the parts concerned should be
wiped clean to remove dust and grit; after lubricating
excess oil and grease should be removed. Particular
attention should also be given to hood latching compo-
nents to insure proper function. When performing other
underhood services, the hood latch, release mechanism
and safety catch should be cleaned and lubricated.
The external lock cylinders should be lubricated twice a
year, preferably in the fall and spring. Apply a small

Advertisement

Table of Contents
loading

This manual is also suitable for:

2007 jk wrangler

Table of Contents